4.2. SR 04-23-2001 - Laserfiche WebLink

Home Browse Search

· Bidder Triplc Combination Pumper Specifications for thc 7 Complies City of Elk River Minnesota yes No I FRONT AXLE The front axle shall be a reverse "I" beam type with inclined king pins with a rated capacity of 1 $,000 pounds. The turning angle shall be 45 degrees or greater. A viewing window shall be provided on each side of the axle for checking the oil level. FRONT AXLE WARRANTY ~ A three (3) year parts and labor warranty shall be provided with this axle, plus an additional two (2) years of parts only coverage. A one (1) year parts and labor warranty for wheel seals shall also be provided. The seal warranty shall apply to the standard wheel seals and shall not apply to another specified seal. If other seals are specified, the warranty shall be parts only. i OIL SEALS Oil seals shall be provided on the front axle. SHOCK ABSORBERS To provide a smoother ride, heavy-duty telescoping shock absorbers shall be provided on the front axle. REAR AXLE The rear axle shall have a capacity of 24,000 pounds. REAR AXLE WARRANTY A three (3) year parts and labor warranty shall be provided with this axle, plus an additional i two (2) years of parts only coverage. A one (1) year parts and labor warranty for wheel seals shall also be provided. The seal warranty shall apply to the standard wheel seals and shall not apply to another specified seal. If other seals are specified, the .Warranty shall be parts only. TOP SPEED OF VEHICLE A rear axle ratio shall be furnished to allow the vehicle to reach an approximate top speed of 67 to 70mph. OIL SEALS Oil seals shall be provided on the rear axle. SUSPENSION Front springs shall be a heavy-duty taper leaf design, 54.00" long by 4.00" wide with a ground rating of 19,000 pounds. The spring pins shall be provided, with double "figure-eight" grease grooves. The bushing that Page 7