4.2. SR 04-23-2001 - Laserfiche WebLink

Home Browse Search

Bidder Triple Combination Pumper Specifications for the 52 Complies CRV of Elk River Minnesota Yes No with universal joints to eliminate binding. Guides for the push/pull control rods shall be chrome-plated castings securely mounted to the pump panel. Identification tags for the discharge controls shall be located directly above the control handle and recessed within the same casting as the guide. All line pressure gauges shall be mounted in individual chrome plated castings with the identification tag recessed in the casting below the gauge. All remaining identification tags shall be mounted on the pump panel in chrome plated bezels. Mounting of the castings and identification bezels shall be done with a threaded peg cast on the "back" side of the bezel or screws. PUMP AND GAUGE PANEL The pump and gauge panels shall be constructed of black vinyl covered aluminum, to allow easy identification of the gauges and controls and to eliminate glare. The black vinyl shall be bonded to the aluminum by the company that supplies the product. A polished aluminum trim molding shall be provided on both sides of the pump panel. The gauge panel shall be hinged, at the bOttom, with a full-length stainless Steel hinge. The fasteners that hold the panel, in the up right position, shall be quarter-turn style. Vinyl covered chains shall be used to hold the panel in the dropped position. The passenger's side pump panel shall.be removable and fastened with quarter-turn fasteners. On the front of the pump house structure, provisions shall be provided for access to the pump. PUMP PANEL GAUGES AND CONTROLS The following shall be provided on the pump and gauge panels in a neat and orderly fashion: - Engine Oil Pressure Gauge: With visual and audible warning - Engine Water Temperature Gauge: With visual and audible warning - Tachometer: Electric - Master Pump Drain Control - Voltmeter - Check Transmission Warning Indicator Light Page 52