4.2. SR 04-23-2001 - Laserfiche WebLink

Home Browse Search

Bidder Triple Combination Pumper Specifications for the 33 Complies City of Elk River Minnesota Yes No Each divider shall be constructed of a. 125" brushed aluminum sheet fitted and welded into a slotted, radiused extrusion along the top, bottom and rear edge. Divider shall be held in place by tightening two (2) bolts, one (1) at each end. Acorn nuts shall be installed on all bolts in the hose bed, which have exposed threads. HOSE BED COVER The black hose bed cover shall be furnished with shock cord hold downs along the sides of the cover and at the rear flap. A Velcro hold down shall be furnished across the front of the Hosebed cover. A flap shall be furnished at the rear of the hose bed cover. The rear flap shall have a chain weight and two shock cord hold-downs. RUNNING BOARDS Running boards shall be fabricated of. 125" bright aluminum treadplate. Each running board shall be supported by a welded 2.00" square tubing and channel assembly, which shall be bolted to the pump compartment substructure. Running boards shall be 12.75" deep and spaced .50" away from the pump panel. A splash guard shall be provided below the running board treadplate. TAILBOARD Rear step shall also be constructed of .125" bright aluminum treadplate and spaced .50" from the body, as well as supported by a structural steel assembly. The rear tailboard shall be 16.00" deep. The exterior side shall be flanged down and in. Flanges shall not be notched. Entire rear surface between the beavertails shall be covered with bright aluminum treadplate to protect the painted surface when removing hose. Inside surface of each beavertail in the hose bed area shall be covered with polished stainless steel to protect the paint finish. The remaining inside surface of the beavertalls shall be covered with bright aluminum treadplate. TOW BAR Page 3 3