4.2. SR 04-23-2001 - Laserfiche WebLink

Home Browse Search

Bidder Triple Combination Pumper Specifications for the 31 CompLies City of Elk River Minnesota Yes No MANUALS, CHASSIS SERVICE Two (2) chassis service manuals containing parts and service information on major components shall be provided with the completed unit. MANUALS, CHASSIS OPERATION Three (3) illustrated chassis operation manuals shall be provided. ELECTRICAL WIRING DIAGRAMS Two (2) electrical wiring diagrams, prepared for the model of chassis and body, shall be provided. WATER TANK Booster tank shall have a capacity of 1000 gallons and be constructed of polypropylene plastic. Tank joints and seams shall be nitrogen welded inside and out. Tank Shall be baffled in accordance with NFPA Bulletin 1901 requirements. Baffles shall have vent openings at both the top and bottom to permit movement of air and water between compartments. Longitudinal partitions shall be constructed of .38" polypropylene plastic and shall extend from the bottom of the tank through the top cover to allow for positive welding. Transverse partitions shall extend from 4.00" off the bottom of the tank to the underside of the top cover. All partitions shall interlock and shall be welded to the tank bottom and sides. Tank top shall be constructed of .50" polypropylene. It shall be reCessed .38" and shall be welded to the tank sides and the longitudinal partitions. Tank top shall be sufficiently supported to keep it rigid during fast filling conditions. Construction shall include 2.00" polypropylene dowels spaced no more than 30.00" apart and welded to the transverse partitions. Two (2) of the dowels shall be drilled and tapped (.50" diameter, 13.00" deep) to accommodate lifting eyes. A sump that is 8.00" long x 8.00" wide x 6.00" deep shall be provided at the bottom of the water tank. Sump shall include a drain plug and the tank outlet. Page 31