5.4. SR 05-17-2010 - Laserfiche WebLink

Home Browse Search

ARTICLE III. SOLID WASTE FACILITIES* Secs.58-195--58-210. Reserved. DIVISION 6. PROCESSING FACILITIES Sec. 58-211. Prohibited areas. Page 20 of 23 No solid waste processing facility shall be located, operated or maintained in any area of the city other than those areas where solid waste processing facilities are a permitted or a conditional use pursuant to chapter 30, article Vl, nor shall such facilities be allowed to locate within: (1) A regional flaodplain (100-year flood). (2) A wetland. (3) Five hundred feet of the nearest edge of the right-of-way of any state, federal, or interstate highway or the boundary of a public park or of an occupied dwelling. Permission may be granted to vary the distance requirement of this subsection (3) in the discretion of the city council, taking into consideration such factors as noise, dust, litter, and other aesthetic and environmental considerations. (4) An area which is unsuitable because of reasons relating to topography, geology, hydrology, soils, air quality, or proximity to wells used for potable water supply. (Code 1982, § 604.30(1)) Sec. 58-212. License. It is unlawful for any person to construct, establish, operate, or maintain a solid waste processing facility, including a resource recovery facility, a waste reduction facility, a refuse derived fuel facility, etc., without first being licensed to do so by the city. Application for a solid waste facility license to operate a solid waste processing facility shall be made in writing to the city and delivered to the city building and zoning administrator. The application shall contain the following information: (1) The name and address of the person requesting the license. (2) The name and address of the owner of the proposed solid waste processing facility. (3) The name and address of the person responsible for actual operation and maintenance of the proposed solid waste processing facility. (4) The street address and legal property description of the property on which the solid waste processing facility is proposed to be located. (5) The present and future population and areas expected to be served by the proposed solid waste processing facility. (6) The characteristics, quantities, and sources of solid waste to be processed at the solid waste processing facility. (7) A minimum of two sets of plans and specifications prepared by a registered engineer of the state clearly indicating the construction which will be undertaken. ($) A plan showing the land uses and zoning, and the location, type, and height of all buildings, within 1,000 feet of the proposed solid waste processing facility. (9) An engineering report including design criteria and expected pertormance data detailing the proposed operating procedures for the solid waste processing facility, including: http://libraryl.municode.com/default-tesilDocView/13427/1/88/91 ~ 3/12/2010