Laserfiche WebLink
Bidder <br />Triple Combination Pumper Specifications for the 70 Complies <br /> <br />City of Elk River Minnesota Yes No <br />- Paint wastes shall be disposed of in an environmentally safe manner. <br />- Empty metal paint containers shall be crushed and recycled to recover the metal. <br />- Solvents used in cleanup operations shall be collected, sent off-site for distillation and <br />returned for reuse. Residue from the distillation operation shall be used as fuel in off-site kilns. <br />Additionally, the finished apparatus shall not be manufactured with or contain products that <br />have ozone depleting substances. The contractor shall, upon demand, present evidence that his <br />manufacturing facility meets the above conditions and that it is in compliance with his State <br />EPA rules and regulations. <br />PAINT CHASSIS FRAME ASSEMBLY <br />The chassis frame assembly shall be painted red. components that are included with the chassis <br />frame assembly that shall be painted red are frame rails, cross members, axles, suspension, <br />steering gear, fuel tank, body substructure supports, miscellaneous mounting brackets, etc. <br />WARRANTY - pAINT AND CORROSION <br />The cab and body exterior paint finish shall be warranted against blistering, peeling, bubbling, <br />lack of adhesion or any other manufacturing or material defect for a period of six (6) years. <br />The cab and body shall also be warranted against corrosion perforation for a period often (10) <br />years. <br />A copy of the manufacturer's warranty shall be included with the bid. <br />PAINT, COMPARTMENT INTERIOR <br />Interior of compartmentation shall be painted with a gray spatter type paint. <br />REFLECTIVE BAND <br />A 6.00" white reflective band and a 2" charcoal reflective band shall be provided across the <br />front of the vehicle and along the sides of the body. A 4.00" band shall be provided at the rear <br />of the apparatus. <br />REFLECTIVE STRIPE INSIDE RUBRAILS <br />A white reflective stripe shall be provided inside the extruded aluminum rubrails or on the <br />outside centered on the stainless steel rubrails. <br />The reflective band provided on the cab face shall be at the headlight level. <br />MOLDING (on sides of cab) <br />Chrome molding shall be provided on both sides of cab. <br />LETTERING- <br />Page 70 <br /> <br /> <br />