Laserfiche WebLink
Bidder <br />Triple Combination Pumper Specifications for thc 57 Complies <br /> <br />Cit of Elk River Minnesota Yes No <br />prevent corrosion and for easy separation (of the plug). <br />(5) All lights that have their sockets in a weather exposed area shall have corrosion <br />preventative compound added to the socket terminal area. <br />(6) All electrical terminals in exposed areas shall have silicon (1890) applied completely over <br />the metal portion of the terminal. All emergency light switches shall be mounted on a separate <br />panel installed in the cab. A master warning light switch and individual switches shall be <br />provided to allow pre-selection of emergency lights. The light switches shall be "rocker" type <br />with an internal indicator light to show when switch is energized. All switches shall be <br />properly identified and mounted in a removable panel for ease in servicing. Identification of <br />the switches shall be done by either printing or etching on the switch panel. The switches and <br />identification shall be illuminated. <br />All lights and reflectors, required to comply with Federal Motor Vehicle Safety Standard #108, <br />shall be furnished. Rear identification lights shall be recessed mounted for protection. Lights <br />and wiring mounted in the rear bulkheads shall be protected from damage by installing a false <br />bulkhead inside the rear compartments. <br />An operational test shall be conducted to ensure that any equipment that is permanently <br />attached to the electrical system is properly connected and in working order. <br />The results of the tests shall be recorded and provided to the purchaser at time of delivery. <br />STEP LIGHTS · <br />Four (4) step lights shall be provided. <br />One (1) step light shall be provided on each side, on the front compartment face. <br />Two (2) step lights at rear, shall illuminate the tailboard. <br />These step lights shall be actuated with the pump panel light switch. <br />REAR FMVSS LIGHTING <br />A pair of three (3) lamp modules shall be provided. Each module shall include a stop-tail light, <br />directional light and backup light mounted in, a polished aluminum housing. <br />The lights shall be mounted on the face of the rear body compartments. <br />Four (4) red reflectors shall be provided. <br />AUXH,ARY SIDE MARKER LIGHTS, <br />A set of three (3) marker lights shall be installed on each side of the vehicle. <br />Page 57 <br /> <br /> <br />