Laserfiche WebLink
Bidder <br />Triple Combination Pumper Specifications for the 22 Complies <br /> <br />City of Elk River Minnesota Yes No <br />- One (1) in the crew cab, mounted to ceiling <br />The evaporator units shall have an adequate BTU rating to meet the performance <br />specifications. <br />The air conditioning system shall have adjustable air outlets incorporated into the cab dash at <br />both the driver and officer positions. The evaporator unit in the crew cab shall have adjustable <br />air outlets located directly on the evaporator unit. <br />The air conditioner refrigerant shall be R-134A, installed by a certified technician. <br />The cab and crew cab walls shall be insulated with 2.00" insulation where possible and the roof <br />with 1.00" insulation to aid in cooling. <br />The insulation shall be covered with a vinyl liner or a metal panel painted to match the interior. <br />CAB INSTRUMENTATION <br />Instrument panel controls and switches shall be identified to function by imprinted word(s) <br />adjacent to each item. Actuation of the headlight switch shall illuminate Cback-lite") wording <br />for after dark operation. Turn signal and high beam headlight indicator lights shall also be <br />provided. <br />To avoid confusion, warning indicators shall be (where possible) the "dead front" type, <br />meaning the warning light and word identification of the same, does not show up unless it is <br />necessary. The built-in, emergency light switch panel shall have a master switch plus individual <br />switches for selective control. The switch panels shall be located in the "overhead" position <br />above the windshield on the driver's side to allow for easy access <br />All non-emergency switch panels shall be located in a switch housing to the right of the driver, <br />within easy reach. <br />Switches shall be rocker type containing an indicator light, which is an integral part of the <br />switch. Instrument panel gauges, vehicle lights and other electrical accessories shall have <br />proper size wiring to accommodate the expected current load. <br />Wiring shall meet SAE J-1128 specifications for high temperature (250 degrees Fahrenheit <br />minimum) conditions and shall be color, number and function coded. <br />Cab instruments and controls shall be conveniently located within the forward cab section. <br />Gauges and emergency vehicle switches shall be installed on removable panels for ease of <br />service. The following gauges and controls shall be furnished: <br />- Speedometer/Odometer: Electric <br />- Tachometer: Electric <br />Page 22 <br /> <br /> <br />