4.2. SR 04-23-2001 - Laserfiche WebLink

Home Browse Search

Bidder Triple Combination Pumper Specifications for the 15Complies City_ of Elk River Minnesota Yes No The crew cab doors shall be 34.25" wide x 79.00" high for easy entry, and located on the side of the cab. The cab and crew cab doors shall be constructed of extruded aluminum with a nominal material thickness of. 125". The exterior skins shall be constructed from .090" aluminum. All cab and crew cab entry doors shall contain a conventional roll down window. Flush mounted, chrome plated paddle type door handle shall be provided on the exterior of the cab doors. All interior cab door handles shall also have flush paddle handles. The door hinge shall be a stainless steel piano type with a .25" pin. There shall be double automotive type rubber seals around the perimeter of the door framing and door edges to ensure, a weather tight fit. Polished stainless steel scuffplates shall be installed on the inside of all cab doors, extending from the bottom of the door to 9.00" above the floor line. Cab door panels shall be removable without disconnecting door and window mechanisms. Engine hood "side" walls shall be constructed of .50" aluminum, top shall be constructed of · 19" aluminum and shall be tapered at top to allow for more driver and passenger elbow room. The engine hood shall be insulated for protection from heat and sound. The noise insulation keeps the DBA level within the limits stated in the current NFPA series 1900 pamphlet. Full circular inner fender liners, in the wheel wells, shall be provided. The outside rear wall of the crew cab shall be covered with a bright aluminum treadplate panel. A curved, safety glass windshield shall be provided, with over 2,754 square inches of clear viewing area. The cab windshield shall have bright trim inserts in the rubber molding holding the glass in place. All cab glass shall be tinted. Economical windshield replacement glass shall be readily available from local auto glass suppliers. Page 15