5.3. SR 04-21-2008 - Laserfiche WebLink

Home Browse Search

MEMORANDUM TO: Chris Leeseberg, Planner FROM: Terry Maurer, Public Works Director DATE: April 3, 2008 SUBJECT: E&O Tool and Plastics Revised Site Plan Review 226-195P As requested, I have reviewed the revised final Portside Addition and the revised site plans for the E&O Tool and Plastics facility to be located on Lot 2, Portside Addition. The revised plans were dated March 26, 2008. Based upon our review, I believe all the necessary easements have been added or revised on the final plat and therefore the final plat should be approvable from an engineering standpoint. The site plan has been revised to include or correct the comments that were made in my earlier memo dated March 10, 2008. There are still a few items that cannot be corrected on the site plan but must be accomplished prior to construction, such as the NPDES permit and the Stormwater Pollution Prevention Plan. Also, the note added about rip-rap at the storm sewer end section does not meet the City standards for the class of rip-rap. This also can be corrected in the final construction plans. The watermain encircling the building should be looped with the Metalcraft site to the west (lot 1 Portside Addition) to provide for a better system. Also, watermains on the south side of the building should be moved out of the future expansion area to eliminate the need to relocate it in the future. Finally, hydrant locations will need to be approved by the fire chief in the final design phase, prior to construction. Finally, record drawings need to be provided at the conclusion of the construction along with GIS data on the constructed utilities including field-surveyed locations of water, storm sewer and sanitary sewer (X, Y, Z) on the county coordinates system. If you have any questions regarding any of these comments, please contact me. S:Engineering/04 03 08 E&OToolandPlasticsRevisedSitePlan.doc