Laserfiche WebLink
Bid specifications <br />Page 2 Of 4 <br />C. Vehicle Drive <br />The ice resurfacer shall have traction drive motor directly mounted to a transfer case <br />or an acceptable equal. <br />The drive motor shall be a minimum 15-horse power. <br />The ice resurfacer shall have a speed range of 0 - 12 miles per hour, and shall be <br />controlled through afoot-operated device. <br />D. Electric Controls <br />The ice resurfacer shall have electric controls with full diagnostic capabilities and <br />dash display. <br />E. Axles <br />The axle loading shall be fully approved by original equipment manufacturer for the <br />application and minimum capabilities of the axles shall be: <br />Front 6,4001bs. <br />Rear 6,2001bs. <br />F. Breaks <br />The ice resurfacer shall have front disc breaks, rear drum breaks, and a parking brake. <br />G. Hydraulics <br />The ice resurfacer shall have an auxiliary hydraulic pump that powers the machine's <br />hydraulic system. The pump will be driven by a separate electric motor. <br />H. Shaving and Conditioning Unit <br />The ice resurfacer shall have a shaving blade that is a minimum of 77". The <br />apparatus holding the blade shall secure the blade so that the ends can be tapered <br />upwards approximately 1/16" to insure a feather edge effect under normal shaving <br />conditions. A down pressure system shall be included with apparatus so that a <br />constant downward force is applied on the shaving during normal operations. <br />Adjustments to the height and the angle of the blade shall be made from the outside of <br />the conditioner unit, so that easy adjustments can be performed during the operation <br />of the ice resurfacer. The conditioner shall be powder coated. <br />Snow Conveyor <br />Snow shall be removed from the ice surface by a conveyor system, which will <br />distribute the snow evenly in the snow dump tank. A high capacity Slinger of <br />approximately 16" in diameter shall be used. <br />