Laserfiche WebLink
Bid specifications for one (1) <br />New Ice Resurfacer <br />The following specifications are intended to detail and specify the requirements for <br />furnishing one new (unused) currently manufactured model self propelled ice rink <br />resurfacing unit to the City of Elk River. <br />1) General: <br />The ice resurfacer will need to be designed so that the following can be achieved with a <br />one -person operation: <br />Shave the ice surface of rink <br />Pick up shaved ice and store the ice <br />Wash and squeegee the ice surface <br />Distribute water evenly for freezing for a quality sheet of ice <br />Dump snow from storage tank from the front <br />The ice resurfacer shall be the manufacturer's current production model and shall be <br />delivered complete and ready for service. The ice resurfacer shall be equipped with all <br />the manufacturers' standard equipment as advertised, whether or not specifically <br />mentioned in these specifications, in addition to all other equipment and attachments <br />herein. <br />2) Detail Description: <br />The ice resurfacer shall conform to the following minimum requirements: <br />A. Vehicle power <br />Vehicle shall be powered, with a BBI Battery or approved equal. <br />The charger shall be microprocessor controlled, and have diagnostic capabilities. An <br />approved equal will be acceptable. <br />The charger shall be a Ferro Magnetic or approved equal. <br />B. Chassis <br />The chassis shall be equipped with four- (4) wheel drive and front wheel steering or <br />an acceptable equal. <br />The control of the steering is to be done by an automobile type steering wheel or an <br />acceptable equal. <br />