4.10 SR 04-15-2024 - Laserfiche WebLink

Home Browse Search

4. include provisions by which Contractor acknowledges that Design - Builder is not Owner's agent, and that Contractor is not entitled to receive any compensation from Owner for the Work; S. state that change orders, construction change directives, and similar contract modifications that would result in a cost to Owner or a reduction in quality or scope of the Work are not permitted, unless approved in writing by Owner; 6. permit Owner, and those identified by Owner, to attend all inspections of the Work; and 7. state that payment for all Work performed by Contractor shall be made pursuant to a confidential exhibit with Contractor and Design - Builder, in the Mediated Settlement Agreement from funds held in the John Harens Trust Account. 1.2 PROJECT LOCATION A. The Repair Project is located in the City of Elk River, Minnesota, which is located in Sherburne County. 1.3 PROJECT DESCRIPTION A. The Work includes the complete permitting, construction, and start-up necessary for the Repair Project, as including, without limitation: 1. remove the Existing Screw Presses and disconnect all piping, plumbing and electrical associated therewith; 2. demolish existing concrete supports for the Existing Screw Press to allow for install of the New Centrifuge System, and repair floor areas that are damaged during demolition; 3. remove and dispose of the Existing Screw Presses by a manner, and to a location, identified by Design -Builder; 4. remove and dispose of the Existing Reaction Mix Tanks and all related piping, chemical feed piping, electrical and concrete platforms; S. remove and dispose of all walkways and platforms around Existing Screw Presses; 6. disassemble the conveyor servicing the Existing Screw Presses, and reassemble the conveyor to and for use by the New Centrifuge System if compatible. If existing conveyor is not compatible with the New Centrifuge System, new conveyor to be supplied and installed; 2 Page 117 of 201