6.1g ERMUSR 03-12-2024 - Laserfiche WebLink

Home Browse Search

Follow-up flags indicating that Purchaser should investigate situations found at a premise 7.16 such as incorrect data, safety issues, potential tamper, premise repairs required, date/time 5,010 found, Purchaser's parry reported to, and other situations found in the field by the Supplier. No Charge Comments section is to include the correct versus incorrect data found and note follow-up 7.17 flag details. 5,010 No Charge 7.18 Premise as -found condition (based on list to be provided by Purchaser). 5,010 No Charge 7.18 Premise as -left condition (based on list to be provided by Purchaser). 5,010 No Charge 7.19 Certification that locks and seals are in place - Y/N. 5,010 No Charge 7.20 Digital photograph of the as -found meter/meter read. 5,010 No Charge 7.21 Digital photograph of the empty water meter can with meter removed. 5,010 No Charge 7.22 Digital photograph ofthe as -left meter/meter read. 5,010 No Charge 7.23 - If repair required, a digital photograph of the water meter with the meter removed 5,010 No Charge revealing Defective Plumbing: The Supplier shall promptly notify the Purchase if defective plumbing is 7.24 found that could prevent a safe meter change. If the Purchaser concurs, the installation will 5,010 be deferred until repairs are made and the installer informed of the repair. No Charge Effective Shut -Off: The first valve is defined as the upstream shutoff valve or the valve on the street side of the meter. The second valve is on the downstream side of the meter. The curb stop valve is located in the street right-of-way and shall be operated by Purchaser. The installer shall operate the first valve to obtain the shut-off necessary for meter installation: however, should the first valve be defective, the installer shall freeze the service connection upstream of the first valve to obtain the shut-off. Freezing shal I be accomplished with the use 725 of CO2 freeze packs, electrical freeze units, or dry ice. The installer shall freeze the service TBD connection to accomplish shut -offs for accounts with inoperative first valves, at the customer's first scheduled appointment without having to reschedule. I n cases where freezing cannot be employed to obtain the shut-off the meter installer shall inform the Purchaser to close the curb stop valve. Purchaser owns the curb stop and is responsible for repairing buried or broken curb stops. The installer shall note any plumbing problems on the installation record Additional Charge for Freeze shut form. $ 117.12 off only Supplier Leak Testing: After the installation of the metering system is complete, the installer shall open all valves and check for leaks. The installer shall verify that the meter register is functioning properly and that the meter and plumbing connections in the vicinity of the meter 726 do not leak. All leaks or defects shall be repaired. It shall be presumed that any leaks in the 010 vicinity of the water meter reported by the customer to either the Purchaser or the Supplier within 90 calendar days after completion of the installation work at the customers property are the result of the installation work. The Contractor shall repair such leaks and correct all damages which occur during the 90-day period, at the Contractors expense. No Charge Approach: Please describe your proposed approach, at the minimum the installer should turn on the water at the customers hose bib to ensure water is flowing, the installer should 727 flush out any sediment in the line. Then the installer should check for any leaks on the inlet 5,010 and outlet side of the meter. No Charge Warranty: Any leaks found within 90-days of the installation date must be covered by the 7.28 Supplier's warranty. Any leaks from the outlet side of the meter back to the utility 5.010 curbstop/shut-off valve are obviously the responsibility of the installer (or utility No Charge Total Add -on Services Priced Incrementally $ Installation Incremental Services for AMI Module Retrofit with Existing Meter Retrofit Incremental Installation Services (if any of these are included Premise Incremental Optional vendor S in your base quote, then insert $0 in the cost cell) Quantity Add -on Service Extended Cost Clarification Comments 8.1 ID of the installer. 582 No Charge 8.2 Date/time the order is completed. 582 No Charge 8.3 Read from the removed water meter register. 582 No Charge Read from the new water meter register. The reading from the water meter being installed 582 8.4 is expected to be zero. No Charge 8.5 Confi rm serial number of existing water meter. 582 No Charge 8.6 Media Access Control (MAC) or IP address, if present, of the AMI endpoint being installed. 582 No Charge 8.7 Confirm/document manufacturer of the existing meter body. 582 No Charge Follow-up flags indicating that Purchaser should investigate situations found at a premise such as incorrect data, safety issues, potential tamper, premise repairs required, date/time 582 found, Purchaser's parry reported to, and other situations found in the field by the Supplier. 8.8 No Charge 217