Laserfiche WebLink
DocuSign Envelope ID: 58FE3CF5-7330-4F18-9C60-B177A84C616D <br />15. Meter Disconnection or Reconnection Failure <br />A Meter disconnection or reconnection failure is defined as any time the AMI System either a) <br />properly performs a disconnect command but cannot properly perform a reconnect command or <br />b) improperly initiates a remote disconnect to a single Endpoint or to multiple Endpoints and <br />remains unable to automatically reconnect power. <br />In case of such event, ERMU will inform Distributor, at which point correction will be pursued <br />pursuant to the Manufacturer's warranty. <br />16. Tests and Inspections <br />The Equipment furnished pursuant to the Specifications in the appendices to this Agreement <br />shall be in compliance with all of the standard commercial inspections and tests normally <br />performed by Distributor and its Subcontractors or other suppliers. Distributor shall furnish <br />ERMU with such certified information and test certificates as are normally made available to <br />customers of the Manufacturer of Equipment specified within. ERMU or its agent has the right <br />to witness all factory and site tests and inspections. ERMU shall not be required to accept any <br />Equipment until the Equipment has undergone and successfully met such tests and inspections. <br />ISAT. The Distributor and ERMU, in cooperation with the Manufacturer, will complete an ISAT <br />to validate the completion of Phase I Initial Deployment of the AMI System by Distributor, in <br />accordance with the Specifications identified in the appendices to this Agreement, including <br />Distributor's proposal and the Functional Testing and System Acceptance Testing Criteria set <br />forth in the attached Attachment V. ISAT shall be completed within six (6) months of the <br />completion of Phase I unless the ISAT needs to be extended due to Distributor side delays or a <br />Force Maj eure Event. <br />If all testing meets the pass criteria as set forth in Attachment V, the ISAT will be considered <br />successful, and deployment of the AMI System will proceed to Phase II. <br />Initial System Acceptance shall occur on the date ERMU indicates in writing its acceptance of <br />satisfactory completion of the ISAT, which acceptance shall be provided within five (5) days of <br />the successful completion of the ISAT. <br />In the event testing criteria cannot be met or a defined functionality requirement cannot be <br />remedied as part of the testing, the Distributor shall notify ERMU in writing as soon as is <br />practicable and suggest alternate remedies without further costs to ERMU. <br />FSAT. Distributor and ERMU, in cooperation with the Manufacturer, will complete a FSAT <br />after the completion of Phase II Full Delivery of AMI System by Distributor, in accordance with <br />the Specifications identified in the appendices to this Agreement, including Distributor's <br />Proposal and the Functional Testing and System Acceptance Testing Criteria set forth in the <br />attached Attachment V. The FSAT shall be performed at the completion of Phase II Full <br />Elk River Municipal Utilities 13 Core & Main LP <br />52 <br />