80-008 ORD - Laserfiche WebLink

Home Browse Search

. . o . iii. The minimum area of land to be included in a PUD shall be twenty (20) acres under uniform control or ownership. iv. A PUD shall be designed to form a des1rable unified environment within its proposed boundaries. v. A PUD shall not cause undesirable impacts on adjacent lands and land uses. In particular, uses in the PUD perimeter shall be compatible with adj3cent uses outside the PUD. vi. A PUD shall be served by adequate water and sewer systems. vii. A PUU shall not adversely affect exi~ting or proposed parks, sch?ols, streets or other public facilitie~. vii t. The Council may establish va ded anu reasonable lot area, frontage, side yard, and setback requirement~ for a rUD and may authorize a residential d.relling unit density which it determines to be appropriate under the circumstances. Any permltted density shall be consistent with the Comprehensive Development Plan and not adversely affect the public health, safety.and welfare. ix. More than one dwelling unit may be cOl1structeu on a lot within a PUD if authorized by the Council. Uses wilhin PUD's should be constructed on individual lots having no less than eighty percent (80%) of the minimum area for similar uses within that district where they are permitted " subject to the most stringent minimum requIrements. c. Administrative Procedure. 1. Prior to the commencement of formal re'/iew, any person may submit a PUD concept plan to the City requesting ~taff and Planning Commission review and advisory comment. ii. The proponents of a PUD shall submit 3 preliminary subdivision plat and a site plan, along with an appUcation for a conditional use permit to the Planning Commission and Council. The Planning Commission shall review PUD proposats and make recommendations to the Council based on the provisiono contained herein, in the Subdivision Ordinance. and in Section 900.42. .Such preliminary plat and B lte plan shall conform to the provlsioOfl of this Ordinance and the Subdivision Regulations. Such site plan shall show: Proposed sanitary sewer and water systems, including size. type and capacity. Proposed roadways, location, typ~, capacity and paving. The proposed site and existing aJjacent development. Size and location of building anl dwelling unit density. Landscaping. 12.