7.1. EDSR 08-17-2020 - Laserfiche WebLink

Home Browse Search

Sec. 30-1026. -DD downtown district. (created in 2003) (e) Exterior building fanisbes. New development within the downtown district shall utilize the exterior building materials set forth in this section. (1) Primary facades. a. The following are acceptable building materials for primary facades: 1. Modular brick Jumbo brick shall not be allowed. 2. Cut stone such as granite,marble and limestone. 3. Architectural stone. 4. Acid etched architectural precast concrete panels. 5. Architectural metal,not to exceed 25 percent of the unit area. b. The following are acceptable accent materials for primary facades: 1. EIFS, stucco and other cementitious coating. 2. Wood (in the storefront area, bay windows, cupola's and/or corner bays only). 3. Integrally colored split face (rock face) concrete masonry units (CMU) that have a dimensional characteristic of brick (not to exceed 16 inches in length nor four inches in height). 4. Integrally colored burnished block. 5. Ceramic,porcelain,hand crafted or fired tile. 6. Treated brick (such as glazed, dyed or painted). 7. Architectural precast concrete. 8. Fiber cement siding/trim (in the storefront area, bay windows, cupola's and/or corner bays only). C. Accent material are required on both primary and secondary facades and shall comply with the following requirements: 1. Ten to 20 percent of the total unit area (unit width x downtown building height) shall be of an material, different than that of the main body of material. 2. Accent materials shall not be concentrated in any one location. (2) Secondary facades. a. The following are acceptable building materials for secondary facades: 1. Brick. 2. Stucco,EIFS and other cementitious coating. 3. Integrally colored split face (rock face), burnished or glazed CMU (excluding plain or painted). 4. Any material that is acceptable for primary facades.