Laserfiche WebLink
SECTION 02749-PAVEMENT MARKINGS <br /> PART 1-- GENERAL <br /> 1.1 SUMMARY <br /> A. This section covers the furnishing of all labor, materials,tools,equipment and performance of all work and <br /> services necessary or incidental to the application of pavement markings as indicated on the drawings or as <br /> specified herein. <br /> 1.2 METHOD OF MEASUREMENT AND PAYMENT <br /> A. Measurement and compensation for the following items shall be paid according to the referenced <br /> specification or as modified below: <br /> 1. Pavement markings of the specified width will be measured separately by LINEAL FOOT of each type <br /> constructed complete in place as specified. Broken line will be measured by the actual length of line <br /> marked and will not include the gap between the broken lines. <br /> 2. Pavement messages will be measured separately by the number of EACH type constructed. <br /> 3. Crosswalk blocks will be measured by the SQUARE FOOT for the actual area of paint and will not <br /> include the space between the blocks. <br /> B. The furnishing and installing of specific items and/or the performance of work under certain circumstances <br /> shall not be individually paid in the absence of a specific bid item for the work. The costs shall be included <br /> in the unit price bid for the associated pavement markings items.Such items of work include but are not <br /> limited to: <br /> 1. All costs of preparing the surface, including sandblasting and removing of existing(old) pavement <br /> markings on existing pavement areas where a new marking layout is to occur. <br /> 2. Controlling and protecting traffic. <br /> 3. Maintaining the work,together with any other expenses incurred in completing the work that are not <br /> specifically included for payment under other Contract Items. <br /> 1.3 SPECIFICATION REFERENCES <br /> A. MnDOT 2581 shall apply to temporary, removable pavement markings,except as modified herein. <br /> B. Mn DOT 2582,3354,3590,3591 and 3592 shall apply to permanent and painted pavement markings,except <br /> as modified herein. <br /> C. MnDOT Pavement and Marking Specifications shall apply. These specifications may be found at <br /> htto://www dot:s t ate:p n 12:u /o crducts/p vep t kt g Jkiformat�_on.hU L Exceptions are as modified <br /> herein. <br /> D. Unless noted otherwise,the provisions in this section are in addition to the referenced specification. <br /> PART 2-- PRODUCTS <br /> 2.1 MATERIALS <br /> A. Permanent Pavement Markings for application on the final bituminous wearing course shall be: <br /> 1. Epoxy Resin Pavement Markings, in accordance with the referenced specification. <br /> 2. Drop-On Glass Beads, in accordance with the referenced specification. <br /> 3. High Durability Preformed Pavement Markings, in accordance with the referenced specification. <br /> City of Elk River-R13.119052 PAVEMENT MARKINGS <br /> August 2019 PAGE 02749-1 <br /> V122717©Bolton&Menk,Inc.2019,All Rights Reserved <br />