8.1. SR 06-03-2019 - Laserfiche WebLink

Home Browse Search

W WASTE MANAGEMENT signature. Contractor's stamp shall state that Contractor has determined and verified materials, quantities, field measurements, and field construction criteria related thereto, or will do so, and has checked and coordinated the information contained within such submittals with the requirements of the Work and the Contract Documents. 3.17.5 Contractor shall not be relieved of responsibility for deviations from requirements of the Contract Documents by Owner's, Owner's Design Professional's or any Subconsultant's review of Shop Drawings, Product Data, or Samples unless Contractor has specifically informed the Owner's Authorized Representative in writing of such deviation at the time of submittal, and the Owner's Authorized Representative has given written approval of such deviation. Contractor shall not be relieved of responsibility for errors or omissions in Shop Drawings, Product Data, or Samples by Owner's or Owner's Design Professional's or Subconsultant's approval thereof. 3.17.6 Contractor shall clearly and prominently identify all revisions or changes on resubmitted Shop Drawings, Product Data, or Samples from the prior submittal. 3.17.7 When professional certification of performance criteria or materials, systems, or equipment is required by the Contract Documents, Owner shall be entitled to rely upon the accuracy and completeness of such calculations and certifications. 3.17.8 Contractor shall submit Shop Drawings, Product Data, and Samples to the Owner's Authorized Representative in time to allow a minimum of fourteen (14) Days for the Owner's Authorized Representative's review prior to the date Contractor needs the reviewed submittals returned. By agreement of the parties' Authorized Representatives, this time may be shortened or lengthened for a particular job requirement. For Product colors or textures to be selected by Owner, Contractor shall submit all samples together to allow the Owner's Authorized Representative to prepare a complete selection schedule. 3.18 Use of Site 3.18.1 Contractor shall perform and confine operations at the Site to those areas permitted by Applicable Laws, permits and the Contract Documents. To the maximum extent practicable and except as otherwise expressly provided for in the Contract Documents, Contractor shall schedule and complete the Work in a manner that does not interfere with Owner's ongoing business operations, if any, at the Site. 3.18.2 Contractor shall not unreasonably encumber the Site with materials or equipment. 3.18.3 To the extent required by Contractor and not provided by Owner, Contractor shall provide for all lands and access thereto that may be required for use by Contractor for temporary construction facilities or for storage of materials and equipment, and shall indemnify Owner with regard to such use as stated in this Article 3. 3.18.4 In its use and scheduling of the Site and of the Work, Contractor shall give all reasonable cooperation to Owner and Owner's Separate Contractors who may be undertaking parts of the Project for any reason or who may be performing work on other projects of Owner. 3.19 Cutting And Patching 3.19.1 Contractor shall be responsible for cutting,fitting, and patching necessary to accomplish the Work and shall suitably support, anchor, attach, match, and trim or seal materials to the work of others. Contractor shall coordinate the Work with the work of Separate Contractors to minimize conflicts, as provided in Article 6, Construction by Owner or by Separate Contractors. 3.19.2 Contractor shall not endanger any Work by cutting, digging, or other action, and shall not cut or alter the Work of other Separate Contractors except with the written consent of Owner and the affected Contractor. 3.20 Cleaning 3.20.1 Contractor shall perform a daily clean-up of all dirt, debris, scrap materials, and other disposable items resulting from Contractor's operations, whether on Site or off Site. Unless otherwise 16 Jun-17 Ver.2.0