8.1. SR 06-03-2019 - Laserfiche WebLink

Home Browse Search

W WASTE MANAGEMENT safe, neat, compact, and protected manner in accordance with Applicable Law and any manufacturer's recommendations. Materials shall be stored in such a manner to cause the least inconvenience to adjacent property owners, tenants, and the general public, and shall not block access to any fire hydrant. Trees, lawns, walks, drives, streets and other improvements shall be protected from damage by the Work, materials, earth, debris, water, or otherwise. If private or public property is damaged by Contractor, it shall be restored to original condition or better by Contractor, in addition to Contractors obligations of indemnification. 3.6.3 Contractor shall obtain Owner's approval for storage areas to be used for materials or equipment, for which payment has been requested under the provisions of Article 9. Access to such storage areas,for inspection purposes,shall be provided to designated Owner representatives. Materials once paid for by Owner, become the property of Owner and may not be removed from the place of storage, except to the Site, without Owner's written permission. Contractor's all-risk insurance shall cover all perils including loss or damage to materials during storage, loading, unloading, and transit to the Site. 3.6.4 Contractor shall ensure that any drawings, plans and specifications for Contractor engineered materials or equipment included as part of the Work have been prepared and certified by a licensed professional engineer who has reviewed and approved all such drawings, plans and specifications, copies of which shall be made available to Owner within a reasonable time after Contractor's receipt of Owner's request therefore. 3.7 Products and Substitutions 3.7.1 For Products specified by reference standards or by description only, Contractor may provide any Product meeting those standards or description. 3.7.2 For Products specified by naming one or more manufacturers, with provision for substitutions (or equal), Contractor may submit a request for substitution for any manufacturer not named, provided that the progress of the Work is not thereby delayed. 3.7.3 When individual specification sections require a specific construction method orthe use of specific construction equipment, with provision for substitutions (or equal), Contractor may submit a request for any method or equipment not named, provided that the progress of the Work is not thereby delayed. 3.7.4 Contractor shall document each request for substitution with complete data substantiating compliance of the proposed substitution with the Contract Documents. A request for substitution constitutes a representation that the Contractor: .1 has investigated the proposed Product, method, or equipment and determined that it meets or exceeds the quality level of the specified Product, method or equipment; .2 will provide the same warranty for the substitution as for the specified Product; .3 will coordinate installation or implementation of the proposed substitution and will make changes to other Work which may be required for the Work to be complete, with no additional cost to Owner; .4 confirms that cost data is complete and includes all related costs under the Contract Documents; .5 waives any Claim for additional cost or time extension related to the substitution; .6 will work with Owner to obtain any required review or redesign services at Contractor's sole cost by a properly licensed design professional; and .7 will work with Owner to obtain any required reapproval and permits from Governmental Authorities necessary for the substitution. 3.7.5 Substitutions will not be considered or allowed when so indicated in the Contract Documents or implied on approved Shop Drawing or Product Data submittals without separate written request, nor will they be considered or allowed when acceptance will require revision to the Contract Documents. 3.7.6 Owner has authority to reject any request for substitution in its sole and absolute discretion. 12 Jun-17 Ver.2.0