8.1. SR 06-03-2019 - Laserfiche WebLink

Home Browse Search

PART 2-- PRODUCTS 2.1 NO EXCEPTION TO THE REFERENCED SPECIFICATION IS MADE. PART 3-- EXECUTION 3.1 CONSTRUCTION REQUIREMENTS A. Remove existing bituminous drives and other specified items where shown on the plans and/or required for the construction of the project. B. Saw cut bituminous and concrete surfaces prior to excavation,to produce a clean-cut breakage joint. C. Dispose of all concrete and bituminous removal items, rubbish and debris outside of the construction zone. It shall be the Contractor's responsibility to secure all required permits and pay all fees associated with the disposal of the material and to secure the disposal site. D. Remove street/traffic signs and similar structures that must be removed to construct the project. Restore these facilities to the original location or a location designated by the Owner,when work has progressed past the location of the structure. E. The Contractor shall take full responsibility to protect structures or other surface improvements from damage that are not to be removed. If damage to these facilities occurs due to the construction of the project,the Contractor shall replace or repair them. F. The Owner will designate which existing items removed as part of the construction,are to be salvaged. All other items shall be disposed by the Contractor. G. All existing sanitary sewer and storm sewer pipe being removed and replaced by new improvements shall be considered as debris and removed during the construction process. H. Where existing pipes are to be abandoned in place,the pipe shall be filled with sand or flowable fill as noted on the plans. The exposed pipe ends shall be bulkheaded shut with a watertight non-shrink concrete grout at a thickness of not less than one pipe diameter. ****END OF SECTION**** Elk River Landfill, Inc. -R16.115896 REMOVING PAVEMENT AND MISCELLANEOUS STRUCTURES March 2019 PAGE 02220-2 V12222017©Bolton&Menk,Inc.2018,All Rights Reserved