Laserfiche WebLink
Stfikethfoughs to be removed <br /> Underlines to be added <br /> (2) Durnpsters and refuse enclosures. <br /> a. All dumpsters shall be completely screened from public view by using enclosures <br /> constructed of similar material as the principal building. <br /> b. Refuse enclosures shall include gates and be located in designated rear or side yards. <br /> (3) Rooftop orground electrical eguprmnt,•signs. <br /> a. All utility equipment shall either be: <br /> 1. Screened from the eye level view of adjoining properties by use of exterior walls <br /> and/or landscaping; <br /> 2. Painted to match or complement the building structures; or <br /> 3. Incorporated into an architectural design, as approved by the building and zoning <br /> administrator. <br /> b. Notwithstanding the provisions of subdivision II of division 5 of this article, the <br /> following requirements regarding signage shall be met: <br /> 1. All freestanding signage shall be of a monument style sign and have a maximum <br /> size of 64 square feet and height of eight feet. <br /> 2. One on-premises business wall sign per occupancy, not to exceed two square feet <br /> in sign area for each linear foot of the building frontage up to a maximum of 128 <br /> square feet per occupancy,is permitted. <br /> (4) Exterior building finishes. <br /> a. It is the intent of the city to promote and encourage high standards of creative <br /> architectural design in the business park district. <br /> b. In the business park zoning district, the following are acceptable building materials <br /> and finishes: <br /> 1. Brick. <br /> 2. Natural or cut stone. <br /> 3. Integrally colored split face (rock face), burnished, or glazed concrete masonry <br /> unit (excluding plain or painted). <br /> 4. Integrally colored and exposed aggregate precast concrete panels (excluding <br /> single-T or double-T panels, plain, uncolored, or raked finish) or specially <br /> designed, cast-in-place concrete. <br /> 5. Glass, architectural metal, fiberglass and aluminum, provided such panels are <br /> factory fabricated and finished with a durable nonfade surface and their fasteners <br /> are of a corrosion-resistant design. <br /> 6. Stucco,E.I.F.S., and other cementitious coating. <br /> 7. Wood, provided the surfaces are finished for exterior use or wood of proven <br /> exterior durability is used, such as cedar, redwood, and/or cypress. <br /> 8. Other materials determined as acceptable by the planning department. <br /> URE <br /> Last Updated il7asch 2014 INATJ <br />