Laserfiche WebLink
Page 1 of 3 <br /> <br /> <br /> <br /> <br /> <br /> <br />TRANSMISSION TRANSFORMED SERVICE RATE <br /> <br />Available: Within Elk River Municipal Utilities (ERMU) established service territory. <br /> <br />Applicable: Available for new non-residential Customer accounts with demand greater than or equal to <br />10 MW. The Customer must maintain a minimum average annual peak demand of 10 MW with an <br />annual load factor greater than 75%. If Customer fails to meet the minimum peak or load factor the <br />Customer may be switched to another electric rate schedule (additional charges may apply to recover <br />stranded costs). The Customer owned equipment must be in compliance with all policies, procedures, <br />safety requirements, and applicable electrical codes. <br /> <br />Character of Service: 3-Phase Transmission Transformed 7,200/12,470-volt, AC, 60 cycles. <br /> <br />Special Conditions: The Customer must execute a contract with the utility that commits to a minimum <br />term of service, identifies the annual peak demand and load factor, agrees to the requirements for <br />registering generation with Midcontinent Independent System Operator (MISO) if applicable, and <br />accepts the certain risks that include fluctuating market-based rates and prices established by MISO. <br /> <br />The Customer must connect directly to the Utility’s distribution substation(s) and provide the location <br />suitable for the installation of the utility owned substation transformer(s) and metering equipment on <br />the Customer’s property. Customer will be responsible for providing suitable wire and connection in the <br />utility owned metering equipment. The metering equipment shall be installed to service one class of <br />business. If additional buildings are required for a given business, they shall be interconnected by the <br />customer to maintain one metered account, unless an exception is approved by management. If <br />additional meters and services are requested by the customer, each shall be treated as a separate <br />customer and billed individually at applicable rate schedule. <br /> <br />ERMU equipment and metering must be accessible to ERMU 24 hours per day. <br /> <br />Billing Determinants <br /> <br />1. Energy: Actual metered hourly kWh usage. <br /> <br />2. Transmission Demand: Actual metered billing period maximum 15-minute interval Customer <br />demand, adjusted for applicable MISO zone transmission losses. <br /> <br />3. Capacity: Customer shall select one of the options below: <br /> <br />a. If the Customer has its own generation, then the capacity billing determinant shall be <br />the maximum metered 15-minute demand in excess of Customer’s registered <br />generation in a given billing period. To qualify for the billing determinant in the <br />48