Laserfiche WebLink
Bidder <br />Triple Combination Pumper Specifications for the Complies <br /> <br />City_ of Elk River Minnesota Yes No <br />actuates after the cab has been lowered. <br />The hydraulic cylinders shall be equipped with a velocity fuse that protects the cab from <br />accidentally descending when the control is located in the tilt position. <br />A redundant mechanical stay arm shall automatically be engaged once the cab has been fully <br />raised. Before lowering the cab, this device must be disengaged using the stay arm control <br />located near the cab raise/lower switch. <br />INTERLOCK~ CAB LIFT TO PARKING BRAKE <br />The cab lift system shall be interlocked to the parking brake. The cab tilt mechanism shall be <br />active only when the parking brake is set and the ignition switch is in the on position, if the <br />parking brake is released the cab tilt mechanism shall be disabled. <br />MIRRORS <br />One (1) Ramco Model# 6000-PCHR polished aluminum mirror shall be mounted on each of <br />the cab doors. The mirrors shall be 9.25" x 13.50", with a convex section. The mirror head <br />shall have a highly polished aluminum finish. <br />The flat glass in each mirror shall be heated and adjustable, with remote controls that are <br />convenient to the driver. <br />The convex section will be bolted to the top of each mirror and shall be adjusted manually. <br />BUMPER <br />A one (1) piece, stainless steel bumper shall be attached to the front of the frame. <br />A 9.00" channel shall be mounted directly behind the bumper for additional strength. <br />The bumper shall be extended 22.00" from front face of cab. <br />HOSE TRAY <br />A hose tray, constructed of aluminum, shall be placed in the center of the bumper extension. <br />The hose tray cannot drop below the height of the front bumper. Maximum hose storage <br />within the hose tray is requested. Black rubber grating shall be provided at the bottom of the <br />tray. Drain holes are also provided. <br />COVER~ HOSE TRAY <br />A bright aluminum treadplate cover shall be provided over the one (1) hose tray. <br />The cover shall be attached with a stainless steel hinge and located over the center mounted <br />hose tray. <br />A "D" ring latch shall secure the cover in the closed position and a mechanical stay arm shall <br />Page 17 <br /> <br /> <br />