6.14. SR 07-15-2002 - Laserfiche WebLink

Home Browse Search

Memo to Mayor/City Council/ZC 02~07 j~y is, 2002 Page 2 Location map Survey of property · Preliminary plat Overview The applicant is requesting to rezone 109 acres from Rle and Rlc (Single Family Residential) to R3 (Townhouse District). Existing Conditions The 109 acre parcel is located on the east side of Twin Lakes Road north of Trott Brook farms at the Twin Lakes Road/Tyler Street intersection. The property is a mix of open fields and woodlands. About 37 acres of the parcel is wetland. The site is also hilly and is bounded by Trott Brook in the southeast corner. Adjacent land uses include single family residential to the south, farmland and Trott Brook to the east, Twin Lakes Road and single family lots to the west and north. Analysis Rezoning Request The applicant is requesting to rezone 109 acres from Rlc (Single Family Residential) to R3 (Townhome District) in order to allow a mixed townhouse and single family residential project. The underlying land use designation for this property is MR (Medium Density Residential), which would allow up to 7.92 units per acre. The proposed project has a net density of about 3.9 units per acre, which is consistent with the underlying land use designation of Medium Density Residential. Contingent on approval of the rezoning request is the preliminary plat for Twin Lakes Crossing. This plat includes a mix of 182 townhouse lots and 70 single family residential lots. An option that the Council should consider is rezoning only the townhouse portion of the project to R3 and leaving the proposed single family area as it is currently zoned, which is Rlc and Rle. If the whole 109 acres is rezoned to R3 and the developer decides not to complete the project, the whole 109 acres could be developed by another developer into 109 acres of townhouses. Only preliminary and final plat approval would be required. Leaving the existing single family residential zoning in place in the area that includes the single family lots would have a minimal impact on those lots. The dimensional requirements for single family lots in the R3 district and the Rle district are the similar; both have a minimum lot size of 12,000 square feet and a minimum lot width of 80 feet. The Rle district also includes a minimum lot depth of 135 feet, the R3 district has no minimum lot depth. The dimensional requirements for the Rlc district, which includes only a small portion of this project, are a minimum lot size of 11,000 square feet, a minimum lot width of 80 feet and minimum lot depth of 130 feet. S:\PLANNING\Case Files\P 02-05 Twin Lakes Crossing\ZC02-07junecc.doc