5.1. PCSR 06-12-2007 - Laserfiche WebLink

Home Browse Search

e. Government buildings and facilities. £ Motor vehicle repair shops, provided that they meet the following conditions: 1. All repair services shall be conducted inside the building. 2. Merchandise shall be stored inside the building. 3. All damaged vehicles stored on the premises shall be stored within an area which is screened by a six-foot high 100 percent opaque fence constructed of factory finished metal or vinyl material. 4. The building shall comply with the material requirements of this section, and 30 percent of any building face and all overhead doors facing any public street shall be constructed of glass material. 5. No sales or display of merchandise outside the building. 6. 'The building shall be a minimum of 15,000 square feet. g. Governmental offices. (e) Additional rtandardr. The following additional standards apply in the BP district: (1) Loading spacer and overhead doors. a. Loading spaces/overhead doors shall be located in designated rear yards and secondarily in designated side yards. Loading areas/overhead doors shall not be located in designated front yards unless approved as a conditional use. b. Loading spaces and overhead doors shall be designed to be compatible with the principal building. Architectural techniques and landscaping shall be employed to reduce visual impacts from adjacent properties and roadways. (2) Dumprterr and refuse enclo.rure.r. a. All dumpsters shall be completely screened from public view by using enclosures constructed of similar material as the principal building. b. Refuse enclosures shall include gates and be located in designated rear or side yards. (3) Kooftop orground electrical equipment; .rign.r. a. All utility equipment shall either be: 1. Screened from the eye level view of adjoining properties by use of exterior walls and/or landscaping; 2. Painted to match or complement the building structures; or 3. Incorporated into an architectural design, as approved by the building and zoning administrator. b. Notwithstanding the provisions of subdivision II of division 5 of this article, the following requirements regarding signage shall be met: 1. All freestanding signage shall be of a monument style sign and have a maximum size of 64 square feet and height of eight feet. 2. One on-premises business wall sign per occupanry, not to exceed two square feet in sign area for each linear foot of the building frontage up to a maximum of 128 square feet per occupanry, is permitted. (4) Exterior building finisher. a. It is the intent of the city to promote and encourage high standards of creative architectural design in the bu"siness park district. b. In the business park zoning district, the following are acceptable building materials and finishes: 1. Brick. 2. Natural or cut stone. 3. Integrally colored split face (rock face), burnished, or glazed concrete masonry unit (excluding plain or painted). 4. Integrally colored and exposed aggregate precast concrete panels (excluding single-T or double-T panels, plain, uncolored, or raked finish) or specially designed, cast-in-place concrete. 5. Glass, architectural metal, fiberglass and aluminum, provided such panels are factory fabricated and finished with a durable nonfade surface and their fasteners are of acorrosion-resistant design. 6. Stucco, E.I.F.S., and other cementitious coating. 7. Wood, provided the surfaces are finished for exterior use or wood of proven exterior durability is used, such as cedar, redwood, and/or cypress. 8. Other materials determined as acceptable by the planning department.