7.10. SR 02-27-1995 - Laserfiche WebLink

Home Browse Search

• 900.24 -PARKING AND LOADING REGULATIONS All parking hereafter constructed or maintained shall conform with the provisions of this section and any other ordinances or regulations of the City. 1. Minimum Size Regulations. Each parking space and drive aisle shall comply with City standards set forth in adopted site design requirements for minimum size „u .~ ..e, ~ ,u ~,,,~,~ .,v ~,ti,Mav,ava ,. ,, ,~ ..~;...~ as set forth in the table below. All loading spaces shall be sufficient to meet the requirements of each use and shall provide adequate space for storage and maneuvering of the vehicles they are designed to serve. Standard Vehicle Stall Width Parking Angle Including Stri~iny Stall Length Aisle Width 90 De. rq ees 9 Feet 20 Feet 24 Feet 60 Degrees 9 Feet 23 Feet 1 Feet 45 De, rq ees 9 Fee 27 Feet 12 Feet Vehicles for Handicapped Stall Width Parking Angle Including Stri ing Stall Length Aisle Width 90 Degrees 13 Feet 20 Fee 24 Feet 60 Degrees 13 Feet 2 Feet 15 Feet 45 Degrees 13 Feet 27_ Feet 12 Feet The stall length can be reduced by the amount of the curb over-hang up to a maximum of two U feet. 2. Reduction and Use of Parking and Loading Space. On-site parking facilities existing on the effective date of this ordinance shall not be reduced in size to an amount less than that authorized under this ordinance for a similar new building or use except following express authorization of the Council pursuant to the provisions of 5:.:.;;v;, ~~~.".2 for obtaining a conditional use ep rmit• Required parking or loading space shall not be used for storage of goods or for storage of vehicles that are inoperable or for sale or rent. a) Anv off-street aarkina space in connection with existing buildings or structures, on the effective date of this ordinance. shall not be removed. enlarged or altered except in conformance with the requirements of this . ordinance. Page 1