6.5. SR 10-15-2007 - Laserfiche WebLink

Home Browse Search

Black Diamond Diamond Grit Blasting Abrasive 40-80 and 30-60 Page 2 ~ fires ~ Eyes Yes ~ Not significant Health Hazarrds (Acute and C17rottic): May cause mechanical irritation to eyes and skin. Low toxicity by ingestion. Primarily hazardous by uthalariozl. post can cause mucous membrane irritation. Repeated or extremely high exposures to dust could cause pneumoconiosis. uacmogentctry r t r! IARC7 - OSHA Regulated _ No (yes for quartz) No (yes for quartz) No signs and symptoms of Overexposure: Shomtess of breath coughing, impaired lung function by Emergency and First Aid Procedures: Eyes: Flush with water for IS minutes. Ingestion: prink large amounts of water. Skin: wash with mild soap and water Inhalation: Move the person to fresh air: support breathing Steps to Be Taken in Case Material is Released or spilled Follow established procedures for handling unregulated dusts and sands. Scoop or shovel into container, controlling dust. The material can be wetted with water to control dust If material has been used for abrasive blasting the waste material may be contaminated from the blasting WactP n,~,,,.a~r urdr,...t• May be disposed of iq an approved landfill in accordance with all EPA, state, and county disposal regulations. Disposal requirements may change once material has been used for abrasive Precautions to be Taken m Handling and storing Minimize inhalation and direct skin contact. Minimize dust generation. Respirator required in enclosed or poorly ventilated spaces and all other work involving high exposure Other Precautions: Carefully follow all EPA, state, and county reeulations Respiratory Protection (Specify Type) NIOSH approved Type CE airline respirator for abrasive blasting. NIOSH approved disposable dust mask (N100 recommended) for comfort, rotection a ainst dust when ourin material Ventilation Local Exhaust spxia) To maintain exposure below TLV/PEL None To Other Nape Use gloves to prevent skin abrasion ~ Safety glasses or chemical goggles Other Protective Clothing or Egmpmem Safety glasses and normal work clothing for limited exposure. Type CE abrasive blasting respirator (including head and face protectiozl) and sturdy coveralls to protect against high dust levels and abrasive effects when doing abrasive blasting The data in this material safety data sheet relate only to the specific material designated herein and does rror relate to use in combination with arry other material or in arty process. The information is believed to be correct as of the date issuer[ Since the use of this information and the conditions of use of the product are not within the control of Black Diamond/.9brasive Technologies, it is the user's obdigaiion ro determine procedures for safe use and disposal of the product and to follow the appropriate safe procedures.