Laserfiche WebLink
3,000 sq. ft. <br />per unit (1 <br />bedroom) <br />30 10 25 40%4 oors <br />or 50′ <br />3,500 sq. ft. <br />per unit (2 <br />bedrooms) <br />30 10 25 40%4 oors <br />or 50′ <br />4,000 sq. ft. <br />per unit (3 or <br />more <br />bedrooms) <br />30 10 25 40%4 oors <br />or 50′ <br />Four lots per 40-acre maximum, with 2½-acre minimum and one curb cut. <br />Side and rear setbacks are increased to 30 feet where the lot abuts a single-family residential zone. <br />Multifamily lot size may be reduced by 400 square feet for every tuck-under or underground garage. <br />Development standards for triplex, quadraminimum, townhome, or condominium dwellings are as <br />follows: <br />(1)  Lot area: 20,000 square feet for triplex or quadraminium dwellings. <br />Townhome or condominium unit lots shall have sufficient area to include within the individual lot <br />the living areas (including bay or bow windows), a garage, decks, patios, or porches of the <br />individual dwelling units. <br />(2)  Lot Width: Base lot width: 100 feet for triplex or quadraminium dwellings. <br />Townhome or condominium unit: 28 feet for end dwellings; 24 feet for internal dwellings located in <br />buildings containing more than four units. <br />(3)  Setbacks, yard: <br />30 feet at the perihery of the development parcel for yards bordering major collector or arterial <br />streets, an additional 20 feet of setback is required to provide a landscaped buffer yard. <br />(4)  Setbacks, building. <br />Setbacks between buildings shall be 25 feet or one-half the sum of the building heights of the two <br />adjoining buildings, whichever is greater. <br />1 <br />2 <br />3 <br />4 <br />Page 224 of 254