5.2 ERMUSR 03-14-2023 - Laserfiche WebLink

Home Browse Search

Elk River Municipal Utilities 13 SupplierCore & Main LP and replace provide replacements for defective Meters or Modules and ship them to the appropriate location for repair or further inspection at no cost to ERMU pursuant to the Sensus Return Material Authorization process. Supplier shall remedy the defect under the terms of the manufacturer’s warranty. For all Non-Associating Meters discovered during Phase I and Phase II Deployment and any warranty period, Supplier shall provide ERMU with replacement Meters or Modules as needed under the terms of the manufacturer’s warranty. 14. Major Catastrophic Meter or Module Failure If during the AMI System Warranty Period a major catastrophic failure of the Meters or Modules provided by the Supplier occurs (with “major failure” being defined as failure to perform according to the Specifications of over two percent (2%) of the installed Meter or Module within any rolling twelve (12) month period), correction will be pursued as set forth in the manufacturer’s warrantyCatastrophic Electric Meter Warranty or Catastrophic Water Meter Warranty attached hereto in Attachment X. Meter and Module failures will be tracked by ERMU and reported to Supplier on a mutually agreed schedule. 15. Meter Disconnection or Reconnection Failure A Meter disconnection or reconnection failure is defined as any time the AMI System either a) properly performs a disconnect command but cannot properly perform a reconnect command or b) improperly initiates a remote disconnect to a single Endpoint or to multiple Endpoints and remains unable to automatically reconnect power. In case of such event, ERMU will inform Supplier, at which point correction will be pursued pursuant to the manufacturer’s warranty. 16. Tests and Inspections The Equipment furnished pursuant to the Specifications in the appendices to this Agreement shall be in compliance with all of the standard commercial inspections and tests normally performed by Supplier and its Subcontractors or other suppliers. Supplier shall furnish ERMU with such certified information and test certificates as are normally made available to customers of Supplier’s manufacturing divisions and subsidiaries and other manufacturers of Equipment specified within. ERMU or its agent has the right to witness all factory and site tests and inspections. ERMU shall not be required to accept any Equipment until the Equipment has undergone and successfully met such tests and inspections. ISAT. The Supplier and ERMU, in cooperation with the manufacturer, will complete an ISAT to validate the completion of Phase I Initial Deployment of the AMI System by Supplier, in accordance with the Specifications identified in the appendices to this Agreement, including Supplier’s proposal and the Functional Testing and System Acceptance Testing Criteria set forth in the attached Attachment V. ISAT shall be completed within six (6) months of the completion 205