Laserfiche WebLink
<br />e <br /> <br />e <br /> <br />C. <br /> <br />e <br /> <br />v. Proposed screening of trash containers, heating, air conditioning and <br />ventilation systems. <br /> <br />B. <br /> <br />Exterior Buildinq Finish <br /> <br />i. Standards for the R-3, R-4, C-1 , C-2 and PUD zones. One hundred percent <br />(100%) of the exterior building finish shall consist of materials comparable in <br />grade and quality to the materials on the list of exterior building finishes <br />referenced in this section. <br /> <br />ii. Standards for the C-3 zoninQ. A minimum of seventy-five (75%) of the <br />exterior building finish shall consist of materials comparable in grade and <br />quality to the materials on the list of exterior building finishes referenced in <br />this section. <br /> <br />iii. Standards for the I-I and 1-2 zones. A minimum of twenty-five percent <br />(25%) of the exterior building finish shall consist of materials comparable in <br />grade and quality to the materials on the list of exterior building finishes <br />referenced in this section. <br /> <br />iv. Approved Exterior Buildinq Finishes <br />(a) Face Brick <br />(b) Natural Stone <br />(c) Glass <br />(d) Wood <br />( e) stucco <br />(f) Aluminum Lapsiding <br />(g) Masonite <br />(h) Vinyl <br />(i) Specially designed precast concrete units or concrete blocks (only if <br />the surfaces have been integrally treated with an applied decorative <br />material or textured). <br />(j) Other approved architectural metal siding <br /> <br />Roofinq Standards. Roofing shall consist of materials comparable in grade <br />and quality to the following: <br /> <br />I. R-3, R-4, C-1, C-2 & PUD shingled or membrane roof <br /> <br />ii. C-3, 1-1, and 1-2 shingled, membrane, colored metal, or dulled <br />noncolored (galvalume-Iike) metal on roofs with a pitch of 1 to 12 or <br />flatter. <br /> <br />Page 9 <br />