4.4 SR 04-05-2021 - Laserfiche WebLink

Home Browse Search

CONSTRUCTION SERVICE AGREEMENT - TERMS AND CONDITIONS Page 2 of 4 3_4- The location and elevation of a proposed structure or facility shall be staked (with offsets) and controlled by surveying or GPS equipment by others. AET's measurements are made in relation to that information. The reliability of any opinions, conclusions, and recommendations based on those measurements is strictly dependent on the accuracy of the staking or GPS information provided by others. 3_5 - During construction, observations and testing Services are based on the positioning of the formwork by the contractor or its subcontractor. AET will not be responsible for any errors or damages resulting from improper location or positioning of the formwork. iFCTIAN a - iAFFTV 4_1 - Client shall inform AET of any known or suspected hazardous materials or unsafe conditions at the site. Client or its authorized representative(s) is responsible for the safety of the jobsite. If, during the course of AET's Services, such materials or conditions are discovered, AET reserves the right to take measures to protect AET personnel and equipment or to immediately terminate Services. Client shall be responsible for payment of such additional protection costs. 4_2 - AET shall only be responsible for safety of AET employees at the site; the safety of all others shall be Client's or other persons' responsibility. SECTION 5 -SAMPLES 5_1- Client shall inform AET of any known or suspected hazardous materials prior to submittal to AET. All samples obtained by or submitted to AET remain the property of the Client during and after the Services. Any known or suspected hazardous material samples will be returned to the Client at AET's discretion. 5_2 - Non -hazardous samples will be held for thirty (30) days and then discarded unless, within thirty (30) days of the report date, the Client requests in writing that AET store or ship the samples. Storage and shipping costs shall be borne solely by Client. SECTION 6 - PROJECT RECORDS The original project records prepared by AET will remain the property of AET. AET shall retain these original records fora minimum of three years following submission of the report, during which period the project records can be made available to Client at AET's office at reasonable times. SECTION 7 - STANDARD OF CARE AET performs its Services consistent with the level of care and skill normally performed by other firms in the profession at the time of this service and in this geographic area, under similar budgetary constraints. SECTIONS - INSURANCE AET maintains insurance with coverage and limits shown below. AET will furnish certificates of insurance to Client upon request. 8.1 — Workers' Compensation Employer's Liability Commercial General Liability Automobile Liability Professional/Pollution Liability Insurance Statutory Limits $100,000 each accident $500,000 disease policy limit $100,000 disease each employee $1,000,000 each occurrence $1,000,000 aggregate $1,000,000 each accident $1,000,000 per claim $1,000,000 aggregate 8_2 - Commercial General Liability insurance will include coverage for Products/Completed Operations extending one (1) year after completion of AET's Services as outlined in our proposal, Property Damage, Personal Injury, and Contractual Liability coverage applicable to AET's indemnity obligations under this Agreement. 8_3 Automobile Liability insurance shall include coverage for all owned, hired and non -owned automobiles. 8_4 Professional/Pollution Liability Insurance is written on a claims -made basis and coverage will be maintained for one (1) year after completion of AET's Services as outlined in our proposal. Renewal policies during this period shall maintain the same retroactive date. 8_5 -To the extent permitted by applicable state law, and upon Client's signing of the proposal, which includes these Terms and Conditions, and return of the same to AET, or Client provided forms of acceptance as defined in Section 1.1; Client and Owner shall be named an "additional insured" on AET's Commercial General Liability Policy (Form CG D414, which includes blanket coverage for the Additional Insured on a Primary and Non -Contributory basis). Client and Owner shall also be named an "additional insured" on a Primary and Non-contributory basis on AET's Automobile Liability Policy (Form CA T4 74). Any other endorsement, coverage or policy requirement may result in additional charges. 8_6 - AET will maintain insurance coverage required by this Agreement at its sole expense, provided such insurance is reasonably available, with insurance carriers licensed to do business in the state in which the project is located and having a current A.M. Best rating of no less than A minus (A-). Such insurance shall provide for thirty (30) days prior written notice to Client for notice of cancellation or material limitations for the policy or ten (10) days' notice for non-payment of premium. 8_7 - AET reserves the right to charge Client for AET's costs for additional coverage requirements unknown on the date of the proposal, e.g., coverage limits or policy modification including waiver of subrogation, additional insured endorsements and other project specific requirements. ACS 403C (01/21) AMERICAN ENGINEERING TESTING, INC.