Laserfiche WebLink
<br />OPTION A <br /> <br />E. .Arxessory structures not exceeding one hundred twenty (120) square feet in floor <br />area may be permitted in any zOne and may be fini~hed with metal panel sicline-. wood, vinyl <br />lap siding, metal lap sid;nr;1 md/or masonry so long as the strua:u.res comply with the <br />required m;nirmnn setbacks and the st:ructures are anchored to the ground in compliance <br />with all applicable buil~ codes. <br /> <br />F. On lots less than two 'and one half (21/2) a.c:res in theRlb, R1c; RId orRle <br />districts, no detached accessory strUctures greater than one hundred twenty (120) square feet <br />shall be finished :with metal panel siding. In the A1 and R1a districts, and on two and one <br />half (2 1/2) acres or greater in the R1b, R1c, R1d or Rle districts, accessory structures may <br />be finished with metal anel si' wood,' la si' metal si' and! or masonry. <br /> <br /> <br />roofing material on any accessory structure. <br /> <br />G. In any zone, all metal4ini~hes/ coverings shall be factory pre-finished. In all zones, <br />except A1, galvanized corrugated panels shall not be allowed. All accessory structures <br />greater than one hundred twenty (120) square feet shall require a building permit and comply <br />with all applicable building codes. <br /> <br />Definitions: <br /> <br />Metal Panel Siding: Metal finishes/coverings that are applied to the exterior of walls and <br />roofs which ,are greater than eight (8) inches in width.. . <br /> <br />Metal Lap' Sidin&: Metal finishes! coverings that are applied to the exterior of walls and <br />roofs whiCh are eight (8) inches or less in width. <br />