Laserfiche WebLink
SECTION 02740-PLANT-MIXED BITUMINOUS SURFACING <br /> PART 1-- GENERAL <br /> 1.1 SUMMARY <br /> A. This section covers the furnishing of all labor, materials,tools,equipment and performances of all work and <br /> services necessary or incidental to the construction of plant-mixed bituminous surfacing utilizing the <br /> MnDOT Gyratory Design Specification (2360)as indicated on the plans or as specified herein. <br /> B. This is a Certified Plant Project. The supplier shall have sufficient testing facilities and qualified personnel <br /> including Certified Technicians. All required plant and field tests shall be performed in a timely manner and <br /> with a good quality control program. <br /> 1.2 METHOD OF MEASUREMENT AND PAYMENT <br /> A. Measurement and compensation for the following items shall be paid according to the referenced <br /> specification or as modified below: <br /> 1. All costs of furnishing and applying bituminous tack coat material will be incidental with no direct <br /> compensation being made therefore. <br /> 2. Payment shall be at the unit price bid per TON of bituminous surfacing for the respective bituminous <br /> courses. The amount bid shall include all material and work required to mix and place the bituminous <br /> course specified. <br /> 3. The Contractor shall allow one thousand dollars($1,000) in the bid to cover the expense of taking ten <br /> (10) random,3.0-inch diameter core samples and patching the bore holes. Should any or all of the core <br /> samples be deleted,the proportionate core expense shall be deducted from the final project cost. <br /> Additional core samples required by the Engineer shall be compensated at thirty dollars($30) per core. <br /> B. The maximum payment factor for density is 100 percent. <br /> C. This project is not subject to the provisions of MnDOT 2399. <br /> D. The furnishing and installing of specific items and/or the performance of work under certain circumstances <br /> shall not be individually paid in the absence of a specific bid item for the work. The costs shall be included <br /> in the unit price bid for the associated bituminous paving items.Such items of work include but are not <br /> limited to: <br /> 1. Equipment and materials necessary for meeting the testing requirements of Source Quality Control for <br /> the bituminous tack coat, if required, include in price bid for bituminous tack coat. <br /> 2. The cost of all labor,equipment and materials necessary to comply with plant and field testing <br /> requirements of MnDOT Specification 02360, include in price bid for Plant-Mixed Bituminous Surfacing. <br /> 3. The cost of all labor,equipment and materials necessary for constructing clean,vertical,solid edge at <br /> the adjacent asphalt surface for both non-wear and wear courses, include in the price bid for Plant- <br /> Mixed Bituminous surfacing. <br /> 4. Sawcutting the bituminous edges and removing of damaged bituminous just prior to the construction <br /> of the next lift of bituminous course. <br /> 1.3 SPECIFICATION REFERENCE <br /> A. Plant mixed asphalt pavement shall conform to the current MnDOT 2360 Plant Mixed Asphalt Pavement <br /> and Technical Memoranda in force 30 calendar days prior to bid date and referencing the use of English <br /> units of measure,except as modified in these Specifications. <br /> B. MnDOT 2357 shall apply to the construction of bituminous tack coat,except as modified herein. <br /> City of Elk River-R13.119052 PLANT-MIXED BITUMINOUS SURFACING <br /> August 2019 PAGE 02740-1 <br /> V050208©Bolton&Menk,Inc.2019,All Rights Reserved <br />