Laserfiche WebLink
<br />OPTION A <br /> <br />E. Accessoty structures not exceeding one hundred twenty (120) square feet in floor <br />area.may be permitted in any zOne and may be finished with. metal panel siding, wood, vinyl <br />lap siding, metal lap siding, and! or masonty so long as the structures comply with the <br />required minimum setbacks and the structures are anchored to the ground in compliance <br />with. all applicable building codes. <br /> <br />F. On lots less than two and one half (2 1/2) acres in the R1b, R1c, R1d or R1e <br />districts, no detached accessOty structures greater than one hundred twenty (120) square feet <br />shall be finished with metal panel siding. In the Al and R1a districts, and on two and one <br />half (2 1/2) acres or greater in the R1b, R1c, R1d or R1e districts, accessoty structures may <br />be finished with. metal I si' wood,' lla sidin metalla si' and! or masomy. <br /> <br /> <br />roofing material on any accessoty structure. <br /> <br />G. In any zone, all metal finishes/coverings shall be factoty pre-finished. In all zones, <br />except A1, galvanized corrugated panels shall not be allowed. All accessoty structures <br />greater than one hundred twenty (120) square feet shall require a building permit and comply <br />with. all applicable building codes. <br /> <br />DefInitions: <br /> <br />Metal Panel Siding: Metal finishes/coverings that are applied to the exterior of walls and <br />roofs which are greater than eight (8) inches in width. <br /> <br />Metal Lap Siding: Metal finishes/coverings that are applied to the exterior of walls and <br />roofs which are eight (8) inches or less in width. <br />