Laserfiche WebLink
SP0178-2007 <br /> APPENDIX B: Recommended Responsibilities <br /> This appendix is a list of recommended responsibilities that B1.3 Responsibilities of the Designer <br /> should be assigned to the purchaser, designer, fabricator, <br /> lining applicator, and inspector in order to obtain a properly B1.3.1 The designer should be responsible for <br /> designed and fabricated tank or vessel for interior lining. including the required fabrication and surface details on <br /> all sketches and drawings related to the tank or vessel. <br /> B1.1 Joint Responsibilities <br /> B1.4 Responsibilities of the Fabricator <br /> B1.1.1 The purchaser, designer, fabricator, lining <br /> applicator,and inspector(s) should review and agree to B1.4.1 The fabricator should be responsible for <br /> the requirements involved before contractual adhering to the fabrication and surface finish details <br /> agreements are made. shown on the working drawings and described in the <br /> tank or vessel specifications. <br /> 81.1.2 The purchaser, in agreement with the <br /> fabricator and lining applicator, should assign B1.4.2 Responsibility for an inspection of the blast or <br /> responsibility for inspection of fabrication, surface any additional welding, grinding, or surface finishing <br /> finish, and lining application, and such responsibility that may be revealed by the surface preparation for <br /> should be defined in all contracts. lining, plus any subsequent reblasting, should be <br /> defined in the lining contract. <br /> B1.2 Responsibilities of the Purchaser(Owner or User) <br /> B1.4.3 The fabricator, when checking the quality of <br /> B1.2.1 The purchaser should be responsible for the weld, should use only those materials that can be <br /> specifying and/or approving the detail requirements for readily and thoroughly removed by the fabricator after <br /> design, fabrication, and surface finish to all parties completion of the inspection procedure. <br /> concerned. <br /> B1.5 Responsibilities of the Lining Applicator <br /> B1.2.1.1 The detailed requirements should be <br /> fully described in writing and include drawings of B1.5.1 Responsibility for additional welding, grinding, <br /> the tank or vessel to be fabricated and lined and or surface finishing that may be revealed by the surface <br /> service requirements. preparation for lining, plus any subsequent reblasting, <br /> should be defined in the lining contract. <br /> 81.2.1.2 The purchaser should advise the <br /> designer, fabricator, lining applicator, and all B1.6 Responsibilities of the Inspector(s) <br /> inspectors of the detailed requirements, <br /> including time schedules, inspection, and B1.6.1 A qualified inspector whose qualifications and <br /> acceptable requirements,in writing. affiliation are acceptable to all parties should be <br /> responsible for the verification of fulfillment of design, <br /> fabrication,and surface finish requirements. <br /> NACE International 11 <br /> 194 <br />