Laserfiche WebLink
SP0178-2007 <br /> Inside of Tank or Grind Smooth Inside of Tank or <br /> Vessel Vessel <br /> so, <br /> Gap <br /> DO <br /> DON'T <br /> Inside of Tank or <br /> Inside of Tank or Vessel <br /> Vessel Continuous Fillet Meld <br /> Weld <br /> Itk< <br /> Gap <br /> DO <br /> DON'T <br /> FIGURE A5 <br /> Butt welding shall be used whenever possible rather than lap welding or riveted construction. <br /> /� Inside of Tank or Inside of Tank or <br /> Angle / Vessel Vessel <br /> Stiffener <br /> DO DON'T <br /> FIGURE A6 <br /> Stiffening members should be on the outside of the tank or vessel. <br /> 8 NACE International <br /> 191 <br />