Laserfiche WebLink
MUNICIPAL - 40 UNIT APARTMENT ELK RIVER <br />ELK RIVER, MN <br />BLD1807-00030 <br />7/11/2018 Page 15 <br /> <br /> <br />This information can be provided to you in alternative formats (Braille, large print or audio). <br />An Equal Opportunity Employer <br />identification of the location shall be posted adjacent to the two-way communication <br />system. [IBC 1007.8.2] <br /> <br /> <br />Accessibility Comments: <br /> <br />1. Fixture Mounting Heights. <br /> Accessibility Requirements, Sheet G0.1. <br />Please note the following accessible fixture mounting height/requirements. <br /> <br />The accessible water closet, tub and shower horizontal grab bar height is not properly <br />dimensioned from the floor. Please address. <br /> <br /> Grab Bars. Grab bars for water closets shall comply with Section 609 and shall be <br />provided in accordance with Sections 604.5.1 and 604.5.2. Grab bars shall be provided <br />on the rear wall and on the side wall closest to the water closet. [A117.1 Sect. 604.5] <br /> General. Grab bars shall be installed in a horizontal position, 33 inches minimum and 36 <br />inches maximum above the floor measured to the top of the gripping surface. [A117.1 <br />Sect. 609.4.1, Fig. 604.5.1, Fig. 604.5.2] <br /> <br /> Fig. 604.5.1 Fig. 604.5.2 <br /> <br />The protruding dispenser location is not properly dimensioned from the rear wall. <br /> <br /> Dispensers. Toilet paper dispensers shall comply with Section 309.4. Dispensers <br />located above the grab bar shall be recessed and the outlet of the dispenser shall be <br />located within an area 24 inches minimum and 36 inches maximum from the rear wall. <br />Where the dispenser is located below the grab bar, the outlet of the dispenser shall be <br />located within an area 24 inches minimum and 42 inches maximum from the rear wall. <br />The outlet of the dispenser shall be located 18 inches minimum and 48 inches maximum <br />above the floor. Dispensers shall comply with Section 609.3. Dispensers shall not be of <br />the type that control delivery, or do not allow continuous paper flow. [MR 1341.0604.7, <br />Fig. 604.7]