2 - Laserfiche WebLink

Home Browse Search

B. Unit Width: The minimum width of a dwelling unit within the RM-1 District shall be • twenty-five (25) feet. C. Unit Construction: 1. Building elevations and floor plans shall be furnished with subdivision requests illustrating exterior building material and colors to demonstrate compliance with Chapter 17 of this Title. Building floor plans shall identify the interior storage space within each unit. 2. Provision shall be made for possible decks, porches or additions as part of the initial dwelling unit building plans. The unit lot shall be configured and sized to include decks or porches. 3. In case of gable roof, a minimum eighteen (18) inch roof overhang, soffit shall be required for all residential structures. 4. Exterior Building Finish. The exterior of townhome dwelling units shall include a variation in building materials which are to be distributed throughout the building facades and coordinated into the architectural design of the structure to create an architecturally balanced appearance. In addition, townhome dwelling structures shall comply with the following • requirements: a. A minimum of twenty-five (25) percent of the combined area of all building facades of a structure shall have an exterior finish of brick, stucco and/or natural or artificial stone. b. Except for brick, stucco, and/or natural or artificial stone, no single building facade shall have more than seventy-five (75) percent of one type of exterior finish. c. Except for brick, stucco, and/or natural or artificial stone, no townhome dwelling structure shall have more than sixty (60) percent of all building facades of one type of exterior finish. d. For the purpose of this section, the area of the building facade shall not include area devoted to windows, entrance doors, garage doors, or roof areas. D. Garages: 1. Each dwelling unit shall include an attached garage. 2. Garages shall comply with the following minimum size standards: • 9 P 58-6