5.9 - Laserfiche WebLink

Home Browse Search

Antenna Tower Overlay District Page 8 March 25, 1997 • c. Describe the tower's capacity, including number and type of antennas that can be accommodated; d. Documents what steps the applicant will take to avoid interference with established public safety telecommunications; e. Proof that the proposed tower complies with regulations administered by the Federal Aviation Administration and the FCC; and f. Demonstrates the tower's and/or antennas compliance with all applicable structural and electrical standards, and includes an engineers stamp and registration number. 2. For all commercial wireless telecommunication towers, a letter of intent committing the tower owner and his or her successors to allow the shared use of the tower if an additional user agrees in writing to meet reasonable terms and conditions for shared use. • N. Antennas Mounted on Roofs, Walls, and Existing Towers 1. The placement of wireless telecommunication antennas on roofs, walls, and existing towers may be approved administratively, without requiring rezoning to Antenna Tower Overlay District, provided the antennas meet all applicable requirements of this code and the following: a. The maximum height of an antenna shall not exceed 15 feet above the roof and shall be set back at least 10 feet from the roof edge. b. Wall or facade mounted antennas may not extend 5 feet above the cornice line and must be constructed of a material which matches the exterior of the building or structure. 2. In addition to the submittal requirements found elsewhere in this code, an application for antennas mounted on roofs, walls and existing towers shall be accompanied by the following information: • a. A site plan application which includes the location of the proposed antennas on the structure and elevations;