5.5 PCSR 08-23-1994 - Laserfiche WebLink

Home Browse Search

Resource Recovery Facility Page 2 August 23, 1994 • The proposed building will measure fifty (50) feet by eighty (80) feet (4,000 square feet) and be constructed of metal skin siding and painted to match the existing facility. The applicant proposes one large twenty (20) foot wide by fourteen (14) foot high overhead door on the west elevation. The building will also have a concrete floor. The I1 (Light Industrial) zoning district requires that twenty-five (25) percent of the exterior building elevation must be of an approved finish. Metal skin siding is not an approved finish. The proposed accessory building is 100 percent metal skin siding, therefore, in order to be in compliance with City code, twenty-five (25) of the exterior must be upgraded with an approved finish such as brick, stucco, etc. Staff would suggest that a four (4) foot decorative brick wall be used around the entire perimeter of the structure to protect the lower area from damage and give the building an aesthetically pleasing appearance. STORAGE The building will be used to store equipment and parts which are currently kept outside. The attached floor plan layout shows areas where a lawn tractor and accessories (such as tires, buckets for front end loaders, etc.) will be stored. Other areas of the accessory building will be used to store various parts needed for the • operation of the facility. The applicant has indicated that no hazardous waste of any kind will be kept within the building. RECOMMENDATION Staff recommends approval of the conditional use permit request by the Elk River Resource Recovery Facility to construct a fifty (50) by eighty (80) foot metal skin accessory structure with the following conditions: 1. THE EXTERIOR OF THE ACCESSORY BUILDING BE PAINTED TO MATCH THE EXISTING FACILITY. 2. A MINIMUM OF TWENTY-FIVE (25) PERCENT OF THE EXTERIOR BUILDING MUST CONSIST OF AN APPROVED FINISH AS REQUIRED BY CITY CODE. • resource.pc