Laserfiche WebLink
Richard & Kathy Peterson, CUP Page 2 <br /> October 28, 1993 <br /> • USE OF BUILDING <br /> The proposed structure measures 36 'x80 ' , with a small ( 10 ' x30 ' ) <br /> office/tack room on the front of the structure. The accessory <br /> structure will be used to shelter Mr. Peterson' s five horses <br /> and other equipment related to the horses . A portion of the <br /> building will also be used to store items such as trailers and <br /> other miscellaneous equipment. Attached is a drawing that <br /> shows the outside and inside layout of the structure. The <br /> proposed building will be located directly behind the <br /> applicants home and will be screened from view from any <br /> neighboring homes due to the heavily wooded site. If this <br /> application is approved, the applicant will be required to <br /> submit engineered drawings in order to receive a building <br /> permit. This is a State building code requirement and will <br /> need to be submitted before a building permit can be issued. <br /> SETBACKS <br /> Elk River City Code requires that all metal skinned buildings <br /> are set back 300 feet from any neighboring dwellings . There <br /> are no existing homes located closer than 300 from the proposed <br /> structure. The structure would also be subject to the normal <br /> accessory structure setbacks, which are 35 feet from the front <br /> property line, 20 feet from the side property lines, and 30 <br /> • feet from the rear property line. The site plan prepared by <br /> Mr. Peterson shows that this building would exceed the setback <br /> requirements . <br /> RECOMMENDATION <br /> Staff is recommending approval of the conditional use permit <br /> for Richard and Kathy Peterson allowing a 3, 180 square foot <br /> detached metal skin agricultural accessory building and to <br /> allow two agricultural buildings on one lot with the following <br /> conditions : <br /> 1 . THE COLOR OF THE BUILDING BE COMPATIBLE WITH THE <br /> EXTERIOR OF THE HOUSE. <br /> 2 . THE APPLICANT BE REQUIRED TO SUBMIT SIGNED ENGINEERED <br /> DRAWINGS IN ORDER TO RECEIVE A BUILDING PERMIT. <br />