Laserfiche WebLink
StHlcefkrengks to be removed <br />Underlines to be added <br />(2) Dumpsters and refuse enclosures. <br />a. All dumpsters shall be completely screened from public view by using enclosures <br />constructed of similar material as the principal building. <br />b. Refuse enclosures shall include gates and be located in designated rear or side yards. <br />(3) Rooftop orgmund electrical equipment; signs. <br />a. All utility equipment shall either be: <br />1. Screened from the eye level view of adjoining properties by use of exterior walls <br />and/or landscaping; <br />2. Painted to match or complement the building structures; or <br />3. Incorporated into an architectural design, as approved by the building and zoning <br />administrator. <br />b. Notwithstanding the provisions of subdivision II of division 5 of this article, the <br />following requirements regarding signage shall be met: <br />1. All freestanding signage shall be of a monument style sign and have a maximum <br />size of 64 square feet and height of eight feet. <br />2. One on -premises business wall sign per occupancy, not to exceed two square feet <br />in sign area for each linear foot of the building frontage up to a maximum of 128 <br />square feet per occupancy, is permitted. <br />(4) Exterior building fnisbes. <br />a. It is the intent of the city to promote and encourage high standards of creative <br />architectural design in the business park district. <br />b. In the business park zoning district, the following are acceptable building materials <br />and finishes: <br />1. Brick. <br />2. Natural or cut stone. <br />3. Integrally colored split face (rock face), burnished, or glazed concrete masonry <br />unit (excluding plain or painted). <br />4. Integrally colored and exposed aggregate precast concrete panels (excluding <br />single -T or double -T panels, plain, uncolored, or raked finish) or specially <br />designed, cast -in-place concrete. <br />5. Glass, architectural metal, fiberglass and aluminum, provided such panels are <br />factory fabricated and finished with a durable nonfade surface and their fasteners <br />are of a corrosion -resistant design. <br />6. Stucco, E.I.F.S., and other cementitious coating. <br />7. Wood, provided the surfaces are finished for exterior use or wood of proven <br />exterior durability is used, such as cedar, redwood, and/or cypress. <br />8. Other materials determined as acceptable by the planning department. <br />Last Updated Much 2014 <br />p09f0E0 it <br />NATURE <br />