4.1 ERMUSR 02-13-2018 - Laserfiche WebLink

Home Browse Search

SCHEDULE 3—INTERCONNECTION PROCESS,TECHNICAL REQUIREMENTS,AND OPERATING PROCEDURES 2. References The following standards shall be used in conjunction with this standard. When the stated version of the following standards is superseded by an approved revision then that revision shall apply. IEEE Std 100-2000, "IEEE Standard Dictionary of Electrical and Electronic Terms" IEEE Std 519-1992, "IEEE Recommended Practices and Requirements for Harmonic Control in Electric Power Systems" IEEE Std 929-2000,"IEEE Recommended Practice for Utility Interface of Photovoltaic(PV) Systems". IEEE Std 1547, "IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems" IEEE Std C37.90.1-1989 (1995), "IEEE Standard Surge Withstand Capability(SEC)Tests for Protective Relays and Relay Systems". IEEE Std C37.90.2 (1995), "IEEE Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers". IEEE Std C62.41.2-2002, "IEEE Recommended Practice on Characterization of Surges in Low Voltage (1000V and Less)AC Power Circuits" IEEE Std C62.42-1992 (2002), "IEEE Recommended Practice on Surge Testing for Equipment Connected to Low Voltage (1000V and less)AC Power Circuits" ANSI C84.1-1995,"Electric Power Systems and Equipment—Voltage Ratings (60 Hertz)" ANSI/IEEE 446-1995, "Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications". ANSI/IEEE Standard 142-1991, "IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems—Green Book", UL Std. 1741 "Inverters, Converters, and Controllers for use in Independent Power Systems" NEC—"National Electrical Code", National Fire Protection Association (NFPA), NFPA-70-2002. NESC—"National Electrical Safety Code". ANSI C2-2000, Published by the Institute of Electrical and Electronics Engineers, Inc. Interconnection Process for Distributed Generate Systems