8.2. SR 02-21-2017 - Laserfiche WebLink

Home Browse Search

RADIAL OR \ TRAPEZOIDAL CHANNEL \ STORM WATER SHALL BE CONTAINED � TO THE CHANNEL CONCRETE MAT CROSS SECTIONAL VIEW EXISTING GROUND CONSTRUCTION NOTES: 1. GRADE OUTFALL AREA SO THAT WATER WILL FLOW DOWN THE CENTER OF THE CHANNEL AND BE CONTAINED TO THE CHANNEL. ALL SUBGRADE SURFACES PREPARED FOR PLACEMENT OF MATS SHALL BE SMOOTH AND FREE OF ALL ROCKS, STICKS, ROOTS, OTHER PROTRUSIONS, OR DEBRIS OF ANY KIND. THE PREPARED SURFACE SHALL PROVIDE A FIRM UNYIELDING FOUNDATION FOR THE MATS WITH NO SHARP OR ABRUPT BREAKS IN THE GRADE. 2. APPLY SEED DIRECTLY TO THE PREPARED SOIL PRIOR TO CONCRETE MAT INSTALLATION. USE SEED PER PROJECT SPECIFICATIONS. 3. PRIOR TO INSTALLING HEADWALL, ANCHOR TRENCH INITIAL LEADING EDGE OF MAT 18", FILL AND COMPACT ANCHOR TRENCH. INSTALL HEADWALL OVER MAT. 4. INSTALL CONCRETE MAT ROLLS. AVAILABLE WIDTHS ARE 5.5', 8', 10', 12', & 16' AVAILABLE IN CUSTOM LENGTHS. A CONCRETE SAW SHALL BE USED TO CUT THE MAT TO EXACT SIZE AND SHAPE. 5. APPLICATIONS WHERE OUTFALLS FLOW INTO RETENTION PONDS, EXTEND CONCRETE MAT A MINIMUM OF 3' BELOW LOW WATER ELEVATION. REV: 2/2017 STANDARD PLATE C4 of CONCRETE EROSION MAT N0. �' �, OUTLET INSTALLATION DETAIL 2513 River PRIOR TO INSTALLING HEADWALL, USE CONCRETE SAW ANCHOR TRENCH INITIAL LEADING TO CUT MAT TO EXACT EDGE OF MAT 18", FILL AND SHAPE AND SIZE ZE010 COMPACT ANCHOR TRENCH. INSTALL HEADWALL OVER MAT ❑ ❑ ❑ ED] 01 LD El El El El❑ ❑ El El El ::1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ L- ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 000000000000 ❑ ❑ ❑ ❑ ❑ ❑ Ez ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ MAXIMUM GRADE ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ PER MFG SPECIFICATIONS ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ::1 ❑ ❑ ❑ ❑ ❑ ❑ C 7 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 77nnnnnn177nn77nn77n nnn PLAN CONCRETE MAT CONSTRUCTION NOTES: 1. GRADE OUTFALL AREA SO THAT WATER WILL FLOW DOWN THE CENTER OF THE CHANNEL AND BE CONTAINED TO THE CHANNEL. ALL SUBGRADE SURFACES PREPARED FOR PLACEMENT OF MATS SHALL BE SMOOTH AND FREE OF ALL ROCKS, STICKS, ROOTS, OTHER PROTRUSIONS, OR DEBRIS OF ANY KIND. THE PREPARED SURFACE SHALL PROVIDE A FIRM UNYIELDING FOUNDATION FOR THE MATS WITH NO SHARP OR ABRUPT BREAKS IN THE GRADE. 2. APPLY SEED DIRECTLY TO THE PREPARED SOIL PRIOR TO CONCRETE MAT INSTALLATION. USE SEED PER PROJECT SPECIFICATIONS. 3. PRIOR TO INSTALLING HEADWALL, ANCHOR TRENCH INITIAL LEADING EDGE OF MAT 18", FILL AND COMPACT ANCHOR TRENCH. INSTALL HEADWALL OVER MAT. 4. INSTALL CONCRETE MAT ROLLS. AVAILABLE WIDTHS ARE 5.5', 8', 10', 12', & 16' AVAILABLE IN CUSTOM LENGTHS. A CONCRETE SAW SHALL BE USED TO CUT THE MAT TO EXACT SIZE AND SHAPE. 5. APPLICATIONS WHERE OUTFALLS FLOW INTO RETENTION PONDS, EXTEND CONCRETE MAT A MINIMUM OF 3' BELOW LOW WATER ELEVATION. REV: 2/2017 STANDARD PLATE C4 of CONCRETE EROSION MAT N0. �' �, OUTLET INSTALLATION DETAIL 2513 River