6.2. EDSR 02-09-2004 - Laserfiche WebLink

Home Browse Search

30-1294 ELK RIVER CODE 2. Painted to match or comple- durable nonfade surface and. ment the building structures; their fasteners are of a corrosion- or resistant design. 3. Incorporated into an architec- 6. Stucco,. E.I.F.S., and other tural design, as approved by cementitious coating. the building and zoning admin- 7. Wood,provided the surfaces are istrator. -finished for exterior use or wood b. Notwithstanding the provisions of of proven exterior durability is subdivision II of division 5 of this used, such as cedar, redwood, article, the following requirements and/or cypress. regarding signage shall be met: 8. Other materials determined as 1. All freestanding signage shall acceptable by the planning de- be of a monument style sign partment. and have a maximum size of 64 c. Major exterior surfaces that are ad- square feet and height of eight jacent to any public street, public feet. trail/path, or adjacent residentially 2. One on-premises business wall zoned properties shall be of one of sign per occupancy, not to ex- the acceptable materials and shall ceed two square feet in sign be combined with at least 30 percent area for each linear foot of the of one or more acceptable materials, building frontage up to a max- or with 40 percent punched open- imum of 128 square feet per ings, with or without glass (or as occupancy, is permitted. much as allowed by the Uniform (4) Exterior building finishes. Building Code, whichever is less), neither of which are to be concen- a. It is the intent of the city to promote trated in any one location, unless to and encourage high standards of cre- accentuate a design feature. Major ative architectural design in the busi- exterior surfaces that are visible from ness park.district. but not adjacent to any public street, b. In the business park zoning district, public trail/path,or adjacent residen- the following are acceptable building tially zoned properties shall be con- materials and finishes: sidered transition walls and may have 1. Brick. less than the 30 percent combination or less than 40 percent punched open- 2. Natural or cut stone. ings, but either shall not be reduced 3. Integrally colored split face(rock to zero percent). Reductions below face), burnished, or glazed con- 20 percent shall require staff ap- crete masonry unitJexcluding proval. Such walls shall be screened plain or painted). from view with additional landscap- 4. Integrally colored and exposed ing.The requirement to have at least aggregate precast concrete pan- 30 percent of one or more acceptable els (excluding single-T or dou- materials shall not apply to the load- ble-T panels, plain, uncolored, ilia dock wall. or raked finish)or specially de- d. Major exterior surfaces that are ad- signed, cast-in-place concrete. jacent to any public street, public 5. Glass, architectural metal, fi- trail/path, or adjacent residentially berglass and aluminum, pro- zoned properties shall not exceed • vided such panels are factory fabricated and finished with a 160 feet zero inches in length with- out a minimum four-foot depth change Supp. No. 2 CD30:140