Laserfiche WebLink
EXHIBIT E <br />Development Standards <br /> <br />Building design shall be consistent with Figure 1 below, or with the design guidelines <br />enumerated herein: <br /> <br /> <br />Figure 1 <br /> <br />Design Guidelines <br />Building design and construction standards. The building design and construction standards <br />are as follows: <br /> <br />(1)Unit width. The minimum width of a dwelling unit shall be 30 feet. <br />(2) Unit construction. <br />a. In case of a gable roof, a minimum 12-inch overhang on gable <br />ends shall be required. All other soffits are to have a minimum 12- <br />inch overhang. <br />b. The exterior of dwelling units, not consistent with Figure 1 above, <br />shall be submitted for review by the planning department and shall <br />comply with the following requirements: <br />1. A minimum of 25 percent of the combined area of the <br />front façade of a structure shall have an exterior finish of <br />brick, stucco and/or natural or artificial stone. <br />2. Except for brick, stucco, and/or natural or artificial stone, <br />no single building facade shall have more than 75 percent of <br />one type of exterior finish. <br />3. Except for brick, stucco, and/or natural or artificial stone, <br />no townhome dwelling structure shall have more than 60 <br />percent of all building facades of one type of exterior finish. <br />Deck railings may be included as a change of material on the <br />facade of a building. <br />. <br />11 <br /> <br /> <br />C:\Users\cleeseberg\Desktop\P 14-06 PUD Agreement FINAL.doc <br />