Laserfiche WebLink
~ 30-1294 ELK R1-VER CODE <br /> <br />(4) <br /> <br /> 2. Painted to match or comple- <br /> ment the building structures: <br /> or <br /> <br /> 3. Incorporated into an architec- <br /> tural desi~m~, as approved by <br /> the building and zoning admin- <br /> istrator. <br /> <br /> b. Notwithstanding the provisions of <br /> subdivision II of division 5 of this <br /> -article, the followin8 requirements <br /> regarding si~o-aage shall be met: <br /> 1. ,~1 freestandin~ si~nage shall <br /> be of a monument style sign <br /> and have a maximum size of 64 <br /> square feet and height of eight <br /> feet. <br /> <br /> 2. One on-premises business wall <br /> sign per occupancy, not to ex- <br /> c'eed two square feet in si~n <br /> area for each linear foot of the <br /> building frontage up to a max- <br /> imum of 128 square feet per <br /> occupancy, is permitted. <br /> <br />E~erfor bu~Idfng l~nfshes. <br /> <br />a. It is the intent of the city to promote <br /> and encourage high standards of cre- <br /> ative architectural desism in the busi- <br /> ness park district. <br /> <br />b. In the business park zoning district <br /> the following are acceptable building <br /> materials and finishes: <br /> 1. Brick. <br /> <br /> '2. Natural or cut stone. <br /> <br /> 8. Inte~ally colored split face (rock <br /> face), burnished, or glazed con- <br /> crete masonry unit/excluding <br /> plain or painted). <br /> <br /> 4. Inte=o-ralty colored and exposed <br /> aggre=~ate precast concrete pan- <br /> els (excludin8 single-T or dou- <br /> NeT panek plain, uncolored, <br /> or raked finishi~ or specially de- <br /> signed? cast-in-place concrete. <br /> <br /> 5. Glass, architectural metal, fi- <br /> berglass and aluminum, pro- <br /> vialed such panels are factory <br /> fabricated and finished with a <br /> <br /> durable nonfade surface and <br /> their fasteners are of a cmvosion- <br /> resistant desi=~n. <br /> 6. Stucco, Et.RS., and other <br /> cementitious coating. <br /> <br /> ?. Wood, provided the surfaces are <br /> -finished for exterior use or wood <br /> of proven exterior durability is <br /> used, such as cedar., redwood, <br /> and/or c~vpress. <br /> <br /> $. Other materials determined as <br /> acceptable by the planning de- <br /> partment. <br /> c. Major ekterior surfaces that are ad- <br /> jacent to any public street, public <br /> trail/path, or adjacent residentially <br /> zoned properties shall be of one of <br /> the acceptable materials and shai] <br /> be combined with at least $0 percent <br /> of one or more acceptable materials, <br /> or with 40 percent punched open- <br /> in=~s, with or without glass (or as <br /> much as allowed by the Llniform <br /> ]Building Code, whichever is less), <br /> neither of which are to be concen- <br /> trated in any one location, unless to <br /> accentuate a desi~om feature. Major <br /> exterior s%ufaces that are ~isibte from <br /> but not adjacent to any public street, <br /> public trail/path, or adjacent residen- <br /> tially zoned properties shall be con- <br /> sidered transition walls and may have <br /> less than the $0 percent combination <br /> or less than 40 percent punched open- <br /> ings, but either shall not be reduced <br /> to zero percent). Reductions below <br /> 20 percent shall require staff ap- <br /> proval. Such walls shall be screened <br /> fi'om view with additional landscap- <br /> ing. The requirement to have at least <br /> S0 percent of one or more acceptable <br /> materials shall not apply to the load- <br /> ing dock wall. <br /> <br />d. ~ajor exterior surfaces that are ad- <br /> jacent to any public street, public <br /> trail/path, or adjacent residentially <br /> zoned properties shall not exceed <br /> 160 feet zero inches in length with- <br /> out a n~mimum four-foot depth chan~e <br /> <br />$~,p~: No 2 CD30:140 <br /> <br /> <br />