Laserfiche WebLink
October 16, 2001 <br /> <br />Gold Nugget Development <br />Attn: Horst Grazer <br />8857 Zealand Avenue N <br />Brooklyn Park, MN 55445 <br /> <br /> Sherb <br />PUBLIC WORKS DEPARTMENT <br /> <br /> 425 Jackson A venue <br />Elk River, MN 55330 <br />(763) 241-7034 · 800-594-5208 <br /> FAX (763) 441-2264 <br /> <br />Re: Access for Kliever Lake Fields; Permit No. 00-12-51 <br /> <br />Dear Mr. Grazer; <br /> <br />The access permit you recently applied for to CSAH 12 for Kliever Lake Fields has been <br />approved with the following conditions: <br />1. A right turn lane is required off CSAH 12 and must be constructed according to MnDOT <br /> standards and match the existing section. <br />2. A bypass lane must be constructed off CSAH 12 to Sherburne County Standards and must <br /> match the existing section. <br />3. A stop sign, right turn sign, no passing pennant and a double arrow sign is to be paid for by <br /> the developer and will be installed by the public works department. The developer must <br /> notify the public works department for installation, when the road can be traveled by the <br /> public. <br />4. Make all pavement marking changes as necessary. <br />5. Remove any existing entrances within the boundaries of the plat. <br />6. The developer is responsible for drainage studies. Your engineers must determine if a <br /> culvert is necessary under Johnson Street NW. If it is, it must have 6:1 safety aprons and <br /> grates. Both the cost of the culvert and the installation are the responsibility of the developer. <br /> <br />Remember that slopes within our right-of-way for the access (Johnson Street NW) must be <br />6:1 and all disturbed areas must have topsoil applied and be seeded. All requirements are <br />listed on the back of the permit. Your permit expires on September 1, 2002. <br /> <br />If you have any questions, please call me at 241-7034 <br /> <br />Sincerely, <br /> <br />Richard D. Corbin <br />Sherburne County Public Works <br /> <br />Cc: Paul Cherne,P.E. Pioneer Eng. <br /> <br /> <br />