Laserfiche WebLink
(3) <br /> <br /> Guidelines: <br />a. No more than two (2) medallions are recommended in the Lower Facade. <br />b. Maintain a regular pattern or rhythm with other facades along the street. <br />c. Masonry columns, piers and/or pilasters are encouraged and should compliment <br /> and/or match the material used on the Upper Facade to help define the storefront <br /> patterns and rhyduns. <br /> <br />Kickplates. <br /> <br /> Standards: <br />a. Shall be eighteen (18) to twenty-four (24) inches in height. <br />b. Excluding wood shakes, kickplates may be of an acceptable accent building material. <br />c. Color shall be neutral, blend and compliment with the major building materials. <br /> <br />(4) Display Area. <br /> <br />(5) <br /> <br />(6) <br /> <br /> Standards: <br />a. Sills shall be directly above the top of the Kickplate. <br />b. Mirrored glass shall not be allowed. <br />c. Wood and/or metal framing shall be finished a color to coordinate with the <br /> building's overall color scheme. <br /> <br />Transom Area. <br /> <br /> Standards: <br />a. Shall be the same as the Primary Facade building material. <br />b. The Transom Area, if it has no awnings, shall have at least forty (40%) to fifty (50%) <br /> percent of the area devoted to a change in material pattern that is unique, but similar <br /> to adjacent Units. <br />c. Glass block and/or Stained Glass will be allowed. Mirrored glass shall not be <br /> allowed. <br /> <br />Guidelines: <br />Transoms may be illuminated from the inside. <br />Incorporation of signage into the Transom Area is a desirable element. <br /> <br />Entrances. <br /> <br /> Guidelines: <br />a. Entrance doors should have a minimum forty-five (45%) percent glass, unless it is <br /> the entrance door to a residential Unit at Street level (i.e. a row house type unit). <br />b. Framing materials should be the same as the overall Storefront design. <br />c. Entrance should reflect the character and scale of space it accesses. <br /> <br />(7) Upper Fagade. <br /> <br />Standards: <br />An articulated Cornice at least twenty four (24) inches in height shall be required for <br />each building Unit Width. Cornice detailing shall be achieved through, but not <br />limited to, corbelling, varied ornamental moldings and reliefs. <br /> <br />s:\document\ordinance\oa97-1.doc <br /> <br /> <br />